MATERIALS
CHARACTERISTICS
• Recessed luminaire with outer casing to be
buried on a draining gravel bed
• Corrugated inlet up to Ø25mm on the sides
and on the bottom.
• Supplied pre-wired with 30cm H05RN-F
3x1mmq cable and IP68 cable gland (5x1mmq
Ver. Dimmable)
• Optical/Driver section not accessible during
installation.
• IP68 protected external driver compartment,
to be inserted in the outer casing during
installation. (4050-4051)
• Independent internal driver compartment not
accessible during installation.
• LED / Driver maintenance can be carried out
by disassembling the glass and closing ring.
(except 4050-4051)
• Driver maintenance can be carried out by
replacing the resin box.(Only 4050-4051)
• Fixed or Dali dimmable output system for
monochromatic LEDs on request
• Sistema RGBW per LED multichip con driver/
controller DMX Remoto 4ch 24Vdc
• Luminaire Conforms to EN60598-1 Standard
and special requirements
• Outer casing in Loaded Polypropylene (PP)30%
GWT750 UV Resist.
• Body/Ring in aluminum alloy for die Casting
• Round / Square Mask in 3mm sandblasted
Stainless Steel AISI316L
• Extra-clear float glass with serigraphy (trasm.
LTF>90%) or etched (trasmi. LTF>40%).
Th. 8mm (CODE 4050/4051) - 12mm (CODE
4151/4151) - 15mm (CODE 4250/4251 -
4350/4351 - 4460/4461)
• Glass gasket in silicone rubber – Tx -50/+250°C
UV resist.
• Passive heatsink in aluminum alloy for
extrusion.
• Internal and external screws in A2 Stainless
Steel
• M16 IP68 brass cable gland
• Polyester powder coating, UV-stabilised with
anti-corrosion treatment.
ASSEMBLY
4150R/4151R
□
192
Ø135
3
4250R/4251R
□
206
Ø216
3
4460R/4461R
□
305
Ø240
3
4350R/4351R
□
313
Ø216
3
255
GROUND RECESSED
PLATHO
