226
GROUND RECESSED
226
APPLICATION
Linear adjustable fixture, suitable for installation as a stand-alone projector. Equipped with secondary optics for
different light distributions, this version of Matrix is particularly suitable for grazing lighting on building facades, to
enhance their material consistency, or to accentuate the architectural details of a historic building. Lamp with passive
circuit, remote driver 24 V DC, therefore dimmable with all systems.
MATRIX MINI
CHARACTERISTICS
• Recessed luminaire with outer casing to be buried on a
draining gravel bed
• Corrugated inlet up to Ø25mm Supplied pre-wired with
50cm cable type 05RN-F 2x0,75
• Independent optical compartment not accessible during
installation.
• LED maintenance can be carried out by disassembling the
head (4 screws) and the support bracket.
• Driver maintenance can be carried out by replacing the
resin box.
• Appliance Complies with EN60598-1 Standard and special
requirements
MATERIALS
• Body in aluminum alloy for extrusion
• Heads / Arm in aluminum alloy for die casting.
• Extra-clear Float glass s = 4mm with silk-screen printing
- LT transmission> 90%.
• UV resist closed cell rubber gaskets. Tx -40 / + 150 ° C
• Glass / Driver gasket in neutral cross-linking silicone
glue - Tx -50 / + 250 ° C UV resist.
• Passive heatsink in aluminum alloy.
• Internal and external screws in A2 stainless steel
• M16 brass cable gland
• UV ray stabilized polyester powder coating with anti-
corrosion treatment
MATRIX MINI
