166
FLOODLIGHTS
VEGA
APPLICATION
Adjustable luminaire suitable to be installed on the wall, ceiling or on the ground as a stand-alone projector or with
spike support. Equipped with secondary optics for different light distributions, it is composed of an insulating base
(or picket) in PC that allows you to install the fixture directly on the ground without oxidation phenomena. All versions
integrate a quick rotation / adjustment system on the horizontal plane by means of a toothed ring nut, without using
any tools. LED source with built-in driver. Available Dali dimmable on request with extra charge.
CHARACTERISTICS
• Adjustable luminaire on two vertical/horizontal planes with
screw tightening.
• Optical/Driver section not accessible during installation.
• Separate driver compartment accessible through the base
with IP68 cable gland.
• Connection to the power supply network M16 cable gland
for cables with a maximum diameter of 10mm, type
H07RN-F 3x1.5 or similar.
• Connection terminal block inside the driver compartment.
• Version with COB LED with direct power supply in AC 230V.
• LED maintenance can be carried out by removing the
optical compartment (3 screws).
• Driver maintenance by disassembling the base.
• Fixed or Dali dimmable system for monochromatics LEDs.
• RGBW system for multichip LEDs with remote control.
• Luminaire Conforms to EN60598-1 Standard and special
requirements
MATERIALS
• Body in die casting aluminium alloy.
• Base in molded Polycarbonate (PC)UV resit.
GWT960°C
• Extra Clear Tempered Glass 4mm with silk-screen
printing. - trasmissione LT>90%.
• Seals in EDPM closed cell rubber, UV- resist. Tx
-40/+150°C.
• Integrated passive heat sink made of aluminium alloy
• Internal and external screws in A2 Stainless Steel
• Polyester powder coating, UV-stabilised with anti-
corrosion treatment.
