SPECIFICATIONS
STANDARD COLOURS
30
ANTHRACITE
DIMENSIONS
ASSEMBLY
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
1070W/WR1.VS
450 lm
260 lm
3000 K
80
5W - 220-240Vac 50/60Hz
II
1070W/NR1.VS
475 lm
275 lm
4000 K
80
5W - 220-240Vac 50/60Hz
II
LED DIRECT AC SYSTEM
CHARACTERISTICS
• Optical system housing accessible during installation.
• Wall connection system with plastic anchoring plate
• Connection to the power supply network through cable gland for cables
with a maximum diameter of 11mm type H07RN-F 3x1.5 or similar.
• LED maintenance by opening the optical compartment.
• Fixed output system with SMD LEDs with direct power supply 220-240Vac.
• Luminaire Conforms to EN60598-1 Standard and special requirements
MATERIALS
• Polyamide Ring PA6
• Wall fixing plate in Polyamide (PA6) filled with 30% GWT960 UV Resist.
• Diffuser in extra-clear acid-etched glass internally LTF> 60%.
• Seals in EDPM closed cell rubber, UV- resist. Tx -40/+150°C.
• Passive heatsink in aluminum alloy for extrusion.
• Internal and external screws in A2 Stainless Steel
• Polyester powder coating, UV-stabilised with anti-corrosion treatment.
• The rated flux values refer to source LED at
Ts70°C / ta25°C
• The Power/Flux in the table refer to maximum
installable value
• Code 1070: Polyamide Body PA6
Installation:
Wall/Ceiling
160
60
160
CODICE 1070
�
112
19
112
�
Beam
>110°
Diffuse Emission
Frosted Glass
Not dimmable
103
WALL
CLIO
SALINITY
RESISTANT
SALINITY RESISTANT
SALINITY RESISTANT
