Chilone
Ernesto Gismondi
2009
Chilone floor
Available with downward emission in two heights
(h4 5cm and h 90cm) and with upward emission
(Chilone Up).
Composed by lamp, support pole
and ground mounting plate.
Lamp unit in die-cast EN-AB 47100 aluminium.
UV resistant diffuser in shock resistant polycarbonate
with satiny finish.
Support pole in extruded EN-AW-6060 aluminium,
chromate treated and painted.
Mounting plate in folded, welded and painted steel,
with holes for ground fixing by means of log bolts
or dowels.
Painting is obtained by means of 3-stage outdoor
treatment: nanotechnologies, antioxidant primer,
polyester paint.
AISI 316 stainless steel screws and silicone
seal gasket.
Provided with IP67 cable and connector
for the mains connection.
Technical features of light fixtures
in compliance with EN60598-1.
IP Rating IP65.
ENEC approved.
Insulation class II.
Chilone pole
Height 250 cm
Composed by lamp, lamp support
and ground fixing pole.
Lamp unit in die-cast EN-AB 47100 aluminium.
UV resistant diffuser in shock resistant polycarbonate
with satiny finish.
Lamp support in extruded EN-AW-6060 aluminium.
Ground fixing pole in painted extruded EN-AW-6060
aluminium. It must be installed by means of a proper
foundation plinth.
Painting is obtained by means of 3-stage outdoor
treatment: nanotechnologies, antioxidant primer,
polyester paint.
AISI 316 stainless steel screws and silicone
seal gasket.
Provided with IP67 cable and connector
for the mains connection.
Technical features of light fixtures
in compliance with EN60598-1.
IP Rating IP65.
ENEC approved.
Insulation class II.
Chilone wall
It can be installed with the light pointed
either downwards or upwards.
Composed by lamp, lamp support and wall support.
Lamp unit in die-cast EN-AB 47100 aluminium.
UV resistant diffuser in shock resistant polycarbonate
with satiny finish.
Lamp support in extruded EN-AW-6060 aluminium.
Wall support in steel.
Painting is obtained by means of 3-stage outdoor
treatment: nanotechnologies, antioxidant primer,
polyester paint.
AISI 316 stainless steel screws and silicone
seal gasket.
Provided with IP67 cable and connector
for the mains connection.
Technical features of light fixtures
in compliance with EN60598-1.
IP Rating IP65.
ENEC approved.
Insulation class II.
Wall support included
Series of light fixtures with direct emission,
with high-performance LED light sources.
Floor, pole or wall installation.
Available in two finishes: light grey painted
and rust painted.
820
