Calumet
Ernesto Gismondi
2012
the electrical interfacing with the external mains
without need of opening the fixture.
All fixing dowels used outside the fixture are in
AISI 304 stainless steel.
The components in die-cast aluminium and the
steel bracket for wall fixing are painted by means
of 3-stage outdoor treatment: nanotechnologies,
antioxidant primer, polyester paint.
Technical features of light fixtures in compliance
with EN60598-1.
IP Rating IP65.
Insulation class II.
Lighting system with single or double emission, with
high-performance LED light sources combined with
lenses which optimize the light emitting efficiency of
the beams and determine their spread.
Available in two sizes: ø 8 e ø 13 cm.
Ceiling and wall installation.
Available in two finishes: light grey and painted
anthracite grey painted.
Calumet wall
Single or double emission version.
Made up of lighting body, lighting cap and wall
fixing bracket.
Cylindrical body in EN AW-6060 aluminium
containing the electronic power supply
components.
Optical lighting body in EN AW-6060 aluminium.
Led and collimator lenses which swing by means of
an aluminium bracket.
Diffuser in toughened glass.
Wall fixing bracket in bent steel.
Water tight silicone gaskets.
Electronic ballast integrated in the body.
PMMA lenses with narrow beam (8,5° and 19°)
White monochromatic LEDs available in 3 colour
temperatures:
Warm = 3000K
Neutral = 4000K
Cold = 6500K
IP65 electrical connection device suitable for cables
with a diameter between 6 and 13 mm and allowing
774
