• Outdoor luminaire for installation on wall or on ceiling.
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content).
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered transparent or sandblasted glass, pure aluminium optics, silicone gasket.
• Glass fixed to the aluminium body through a robotic gluing system.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I
• Installation:
Paolina: wiring through a PG9 nickel-plated brass cable gland (3,5<Ø<8mm cables)
Paola: wiring through two M16x1,5mm plastic cable glands (4,5<Ø<10mm cables)
• Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Designer: Gigetto
Италия
