• Outdoor cylindrical bollard light.
• Configuration: die-cast aluminium cap EN AB-47100 alloy (low copper content) and extruded aluminium pole
• Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Transparent UV-stabilised polycarbonate diffuser, silicone gaskets
• Protection Rating: IP65
• In compliance with EN 60598-1
• Class of insulation: II
• Installation: outdoor use requires suitable flexible cables. The luminaire is equipped with a piece of two-pole cable. Pole in-ground: we recommend to concrete the root of the pole to improve stability. Pole with base: we recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately).
• The luminaire is supplied with a 2-way terminal block for 3-conductor cables - IP68
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Италия
