• Spotlight for outdoor installation on wall, ceiling or floor.
• Configuration: turned aluminium body ( EN AW 6060 ). 316L stainless steel fixing bracket and methacrylate lens. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand- blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done
to protect against rusting.
• Stainless steel cable gland.
• Adjustable beam.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: Theta is equipped with 2 meters neoprene cable for an easy-to-make connection (please provide effective insulation on the connection). Theta 24V is equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and allows parallel wiring. Theta is protected against polarity reversal and sudden voltage peak.
• Installation requires a 24Vdc remote power supply.
• Parallel wiring.
• We recommend the use of a connection system with a protection degree
greater than or equal to the protection degree of the luminaire.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
519001
COOL WHITE 6000K
POWER LED
3W/24Vdc
Total power 3,4W
LED lm 252 ≠ FIXT lm 84
CRI>70
519002
NATURAL WHITE 4000K POWER LED
3W/24Vdc
Total power 3,4W
LED lm 252 ≠ FIXT lm 84
CRI>80
519003
WARM WHITE 3000K
POWER LED
3W/24Vdc
Total power 3,4W
LED lm 194 ≠ FIXT lm 64
CRI>80