• Recessed luminaire for outdoor installation in wall, ceiling or floor.
• Configuration: die-cast aluminium structure EN AB-47100 alloy (low copper content) available in round and square version.
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• The luminaire is composed of a wiring unit connected to an emitting unit with different designs: only glass-round and square; anodized aluminium frame-only round. The glass is fixed to the aluminium structure through a robitic gluing system.
• Tempered transparent or sandblasted glass.
• Protection rating: IP67
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: Tapioca 24V is equipped with a dc/dc highly efficient resin- coated converter that removes electromagnetic interference and allows parallel wiring. Tapioca is protected against polarity reversal and sudden voltage peak. It is equipped with a piece of cable for an easy-to-make connection (please provide effective insulation on the connection). The luminaire is equipped with fixing springs to be locked up to a dedicated box for installation (to be ordered separately). For ground installation it is important to provide a proper gravel layer or drain system (>200mm) to ensure good drainage and to avoid water stagnation.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire
Color
8. Anodized Aluminium