• Outdoor luminaire for installation on wall, ceiling and floor. The version “on post” is only for installation on floor.
• Configuration: die-cast aluminium structure EN AB-47100 alloy (low copper content), extruded aluminium pole (version “on post”), borosilicate transparent or sandblasted glass, moulded silicone gaskets. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I
• Installation Mini Silvia: wiring through M16x1,5 cable gland (4,5<ø<10mm
cables) placed under the head of the luminaire. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. - Mini Silvia on post: the luminaire is supplied with a piece of cable and an IP68 connector (for cables 5<ø<13mm) for direct or end-to-end connection. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately).
• Installation Silvia: wiring through M20x1,5 cable gland (6<ø<12mm
cables) placed under the head of the luminaire. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. - Silvia on post: the luminaire is supplied with a piece of cable and an IP68 connector (for cables 5<ø<13mm) for direct or end-to-end connection. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately).
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red