• Recessed linear luminaire for outdoor/indoor installation in ground or ceiling.
• Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Die-cast double closing end on each side allowing easy and safe maintenance, moulded silicone gasket, 8mm thick tempered transparent or sandblasted glass with silkscreen border mechanically fixed to the body by a silicone adhesive.Electrical components are installed on a removable frame.
• Protection Rating: IP67
• In compliance with EN 60598-1 standards
• Class of insulation: fluorescent lamp: II; LED module: I; RGB: II
• Installation: wiring through two plastic M20 cable glands (6<ø<12mm cables) placed on one of the two closing ends where a plastic box allows connection to the removable electric module. Outdoor use requires suitable flexible cables assuring he watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is important to prived >200mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
Color
2. Aluminium