• Recessed luminaire for outdoor installation in the ground where recessing depth are limited (up to 120mm)
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) in round and square version.
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection Rating: IP67
• In compliance with EN 60598-1 standards
• Class of insulation: I
• Installation: the luminaire is equipped with M20 plastic cable gland and a piece of cable for an easy-to-make connection.RGB version: wiring through two M20 plastic cable glands (6<ø<12mm). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is important to provide a >300mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
• The luminaire is supplied with a 2-way terminal block for 3-conductor cables - IP68 H2O STOP
Color
0. Inox
Италия
