• Recessed luminaire for outdoor installation in the wall.
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low
copper content).
• Double layer coating for high resistance to corrosion: The low copper
Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered transparent glass glued to the frame and moulded silicone gaskets.
• Protection Rating: IP54
• In compliance with EN 60598-1 standards
• Class of insulation: mains: I, LED module: II, III
• Installation: MiniAlfia is equipped with two cable holders for three
single wires. Alfia is equipped with two cable holders for 5<ø<10mm cables. The pole is equipped with a M20x1.5mm plastic cable gland (6<ø<12 cable). Outdoor use requires suitable flexible cables assuring the watertightness of the cable holders. Installation requires a dedicated box to be ordered separately.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Италия
