449
65
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
METAL HALIDE VERSION:
Class A+
HIT-CE/G12
A+
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
EU Regulation 874/2012 - Illumination equipment energy classes
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
The fitting is
equipped with
2 cable input
Protection against
impact.
IK 05 - 7,00 joule
Bollard light
• Luminaire for installation on post – surface mounted.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content), extruded aluminium post. Glass
diffuser: transparent or sandblasted fixed to the structure
through a robotic gluing system.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders that are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components that have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I
• Installation:
wiring
through
two
cable
holders
(8mm<Ø<13mm cables). Outdoor use requires suitable
flexible cables assuring the watertightness of the cable
holder. For watertightness to be assured the use of a
multicore cable is mandatory, the use of single unipolar
cables is not allowed.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
METAL HALIDE VERSION:
Class A+
HIT-CE/G12
LEO 160 ON POST
Leo160 on post
