363
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Pi
PI
65
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
• Spotlight for installation on wall, ceiling or floor.
• Configuration: turned aluminium body (EN AW 6060) and
AISI 316L stainless steel fixing bracket. Glass diffuser: extra
clear with silk-screen border, fixed to the body through a
robotic gluing system.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: III
• Installation: the luminaire is equipped with 2000mm cable
for an easy-to-make connection. It is equipped with a dc/
dc highly efficient resin-coated converter that removes
electromagnetic interference and protects against polarity
reversal and sudden voltage peak. Parallel wiring required.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Pre-wired with approx
2000mm of cable.
Protection against
impact.
IK 05 - 0,70 joule for Pi 50x50
IK 07 - 2,00 joule for Pi 70x70
Floor installation
Ceiling fitting
Wall fitting
Remote device
required.
�AISI 316L stainless steel fixing bracket not painted.
