345
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
MARTINA
67
Martina
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.8 Anodized
Aluminium
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
MiniMartina, Martina
and MaxiMartina
Martina and
MaxiMartina
ONLY
• Adjustable spotlight.
• Configuration: turned and anodized (raw or painted)
aluminium structure with stainless steel adjustable
bracket. Glass diffuser: transparent or sandblasted with
silkscreen border, fixed through a robotic gluing system.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP67
• In compliance with EN60598-1 standards
• Class of insulation: III
• Installation: the luminaire is equipped with 2000mm cable.
Martina 24V and Maxi Martina 24V are equipped with a dc/
dc highly efficient resin-coated converter that removes
electromagnetic interference and protects against polarity
reversal and sudden voltage peak. Parallel wiring required.
Mini Martina, Martina RGB and Maxi Martina RGB requires
connection in series.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Protection against
impact.
IK 05 - 0,70 joule
MiniMartina
IK 07 - 2,00 joule
Martina/MaxiMartina
Ceiling lamp
Wall lamp
Floor installation
Pre-wired with approx
2000mm of cable
Remote device required
�AISI 316L stainless steel fixing bracket not painted
�AISI 316L stainless steel fixing bracket painted