315
MiniFranco
MINIFRANCO
65
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
The fitting is
equipped with
1 cable input
Protection against
impact.
IK 07 - 2,00 joule
Wall fitting
Floor installation
Installation on pole
• Luminaire for installation on wall or on pole.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content) and pure aluminium reflector.
Glass diffuser: extra-clear.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: wiring through a M16x1,5 metal cable gland
(4,5mm<ø<10mm cables). Outdoor use requires suitable
flexible cables assuring the watertightness of the cable
gland. CoB LED version is supplied with a 2-way terminal
block for 3-conductor cables – IP68.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
EU Regulation 874/2012 - Illumination equipment energy classes
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
LED VERSION::
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced