279
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
IOTA
65
H2O STOP
Iota
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
EU Regulation 874 / 2012 - Illumination equipment energy classes
Protection against
impact.
IK 05 - 0,70 joule
Floor installation
Ceiling fitting
Wall fitting
Remote device required.
Pre-wired with approx
2000mm of cable.
Protection against
water ingress
from the cable
Only for IOTA on Pole
• Adjustable projector for installation on wall, ceiling or floor.
• Configuration: turned aluminium body (EN AW 6060) and
AISI 316L stainless steel fixing bracket. Glass diffuser:
extra clear with silkscreen border, fixed to the body through
a robotic gluing system.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: III
• Installation: the luminaire is supplied with 2000 mm
neoprene cable for an easy-to-make connection. It is
equipped with a dc / dc highly efficient resin-coated
converter that removes electromagnetic interference and
allows parallel wiring and is protected against polarity
reversal and sudden voltage peak. The version on pole is
equipped with a 2-way terminal block for 3-conductor
cables – H2O STOP.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
�AISI 316L stainless steel fixing bracket not painted; pole and wall bracket
versions with AISI 316L stainless steel bracket painted.
