185
ARA
65
Ara
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
Recessed ceiling fitting.
Ara GZ10/GU5,3 125x125mm
Pre-wired with approx
250mm of cable
Ara LED 125x125mm
Pre-wired with approx
1000mm of cable
Remote device required
Ara LED 250x250mm
The fitting is equipped
with 2 cable input.
• Square luminaire for installation in the ceiling – recessed.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content). Glass diffuser: transparent or
sandblasted fixed to the frame through a robotic gluing
system.
• Double layer coating for high resistance to corrosion: the
aluminium components are painted with a double coat
using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: mains: I, low voltage: III, LED module: I,II
• Installation: Ara G�10/GU5,3 125x125: pre-wired with
approx. 250mm cable. Ara LED 125x125: prewired with
approx. 1000mm cable. Ara LED 250x250: equipped with
two M16 plastic cable glands. The luminaire is ready for
installation on false-ceiling (up to 30mm thick surfaces).
Installation on solid ceiling requires a dedicated metal box
to be ordered separately. Outdoor use requires suitable
flexible cables assuring the watertightness of the cable
gland / connector.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Protection against
impact.
IK 06 - 1,00 joule
