147
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Trixie
TRIXIE
65
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Recessed wall
fitting.
Protection against
impact.
IK 08 - 5,00 joule
Pre-wired with approx
250mm of cable.
Remote device required.
Wall fitting
• Slim rectangular or round luminaire for installation on wall
� surface or recessed.
• Configuration: die-cast aluminium structure, EN AB-
47100 alloy (low copper content). Moulded transparent
polycarbonate emitting unit (rectangular) or transparent
polyurethane resin filling (round) and polished aluminium
reflector fixed by double-sided technical tape.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: the luminaire is equipped with a piece of
cable for an easy-to-make connection. 24V feeding: power
supply installed in a remote position; 230V feeding: power
supply located behind the luminaire into the recessed box
for installation (to be ordered separately). Outdoor use
requires suitable flexible cables.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
