_ 343 _
www.luznegra.net
www.ecoled.net
1.- Any waterproof ecoled stops being waterproof as soon as we cut it. If we want
to maintain the water-tightness we must apply a “silicone plug” on the cut area
(silicone, insulating resin, etc).
2.- If the installation is carried out in the exterior then all the connections must be
done using waterproof components. This way we avoid any type of short circuit
(water-tight power strips, power supplies, cable coverings, etc).
3.- For the sequencers, converters, amplifiers and programmers we have to
contemplate a safety margin of 15% and therefore we must never apply more
than 85% of the theoretical load (if a converter/sequencer is 100wt power, we
don’t recommend applying more than 85wt).
4.- We recommend use for between 18-20 hours daily (max. recommended for
“PRO” and “PREMIUM” series) and between 8 & 12 hours (max. recommended
for “BASIC” series), taking into consideration that the led strip is on a dissipating
surface and that the surrounding conditions are the appropriate. Use is not
recommended below -20°C and above 45°C otherwise its lifespan will be
affected considerably.
5.- This product is sensitive to static electricity. Avoid touching after having
manipulated plastic. Keep the product in its original packaging until used.
6.- In order to avoid decreases in tension do not connect leads superior to those
indicated on the technical data sheet for each product.
How to choose the correct cable for an installation
Choosing the correct electrical cable is a basic requirement for the equipment which we are connecting to function and above all to ensure the safety of the installation. The section,
or the gauge is the diameter of the cable, which is normally made of copper, without counting the insulating layer. The section determines the electrical charge – in Amps – which the
cable can hold.
Which is better? Rigid or flexible cable?
The rigidity or flexibility of the cable depends on the number of copper wires which it has (one single wire is more rigid than a cable with various wires). The flexible cable is more
manageable and makes work easier in recessing walls and if there are any elbows or bends involved in the installation.
Outside installations and areas with high levels of humidity (SPA)
For outside installations or places which have high condensation levels (eg. saunas and baths), we must ensure that the cable has the correct covering to protect from humidity.
However, we always recommend that the cable goes inside a protection tube.
Maximum cable length (metres) to be applied with leds at 12V/temperature 20°C
Maximum cable length (metres) to be applied with leds at 24V/temperature 20°C
7.- We always recommend closing the circuit in the installation so as to achieve
colour uniformity in the flexible led and a lower drop in tension. This favours an
even distribution of the heat from the led in up to 30% more.
8- For strips with power greater than 14W; always use: heat dissipation tape
aluminium dissipating plate (Ref 12.017) or a led profile to enhance heat
dissipation.
9.- For strips with power greater than 14W; do not use for recessing in wood
otherwise its lifespan will be affected considerably and the guarantee will be
void. (Please check with our technical department for this type of installation).
10.- If we continuously bend the flexible modules we can break its circuit (PCB).
The product must be manipulated with extreme care. Do not bend the flexible
ecoled led strip in a radius less than 3cm or the guarantee will be void.
11.- Do not place the power supply more than 300cm form the installation to avoid
decreases in tension.
12.- Power supplies, sequencers, amplifiers and other accessories must always be
supplied by LUZ NEGRA otherwise the guarantee will become void and we will
not accept any type of claim.
13.- These products are not recommended for saline areas (please check with our
technical department).
Basic rules for installing ecoleds
Cable section for installations
Cable section
(diameter Ø)
10W
20W
30W
40W
50W
75W
100W
150W
200W
250W
0.5mm2
8.1
4.0
2.7
2.0
1.6
1.1
0.8
0.5
0.4
0.3
0.75mm2
12.1
6.0
4.0
3.0
2.4
1.6
1.2
0.8
0.6
0.5
1mm2
16.1
8.1
5.4
4.0
3.2
2.2
1.6
1.1
0.8
0.6
1.5mm2
24.2
12.1
8.1
6.0
4.8
3.2
2.4
1.6
1.2
1.0
2.5mm2
40.3
20.2
13.4
10.1
8.1
5.4
4.0
2.7
2.0
1.6
4mm2
64.5
32.3
21.5
16.1
12.9
8.6
6.5
4.3
3.2
2.6
6mm2
96.8
48.5
32.3
24.2
19.4
12.9
9.7
6.5
4.8
3.9
10mm2
161.3
80.6
53.8
40.3
32.3
21.5
16.1
10.8
8.1
6.5
10W
20W
30W
40W
50W
75W
100W
150W
200W
250W
32.3
16.1
10.8
8.1
6.5
4.3
3.2
2.2
1.6
1.3
48.4
24.2
16.1
12.1
9.7
6.5
4.8
3.2
2.4
1.9
64.5
32.3
21.5
16.1
12.9
8.6
6.5
4.3
3.2
2.6
96.8
48.4
32.3
24.2
19.4
12.9
9.7
6.5
4.8
3.9
161.3
80.6
53.8
40.3
32.3
21.5
16.1
10.8
8.1
6.5
258.0
129.0
86.0
64.5
51.6
34.4
25.8
17.2
12.9
10.3
387.1
193.5
129.0
96.8
77.4
51.6
38.7
25.8
19.4
18.5
645.1
322.6
215.0
161.3
129.0
86.0
64.5
43.0
32.3
25.8
