176
177
Armadio Can-do
Can-do cupboard
Caratteristiche
Nell'armadio Can-Do, l'abbinamento con elettrodomestici ad incasso
prevede tre differenti confi gurazioni valide solo nella versione chiusa
con i forni non a vista:
a) Solo forno h 60 cm, con vano h 64,4 cm
b) Doppio elettrodomestico sovrapposto h 46+46 cm con vano
h 97,4 cm
c) Forno h 60 cm + elettrodomestico h 46 cm, con vano h 112,2 cm
Can-Do in versione chiusa con elettrodomestici ha una profondità
di 70 cm.
Fattibilità
In assenza di copri fi anchi, è possibile affi ancare armadi standard,
direttamente ai lati dell'armadio Can-Do. In questo caso lo zoccolo
dell'armadiatura non corre sulla stessa profondità, non è allineato
sullo stesso piano. È possibile affi ancare più armadi Can-Do, senza
dover utilizzare il copri fi anco. È possibile personalizzare lo schienale
dell'armadio Can-Do nei materiali e nelle fi niture delle ante del
programma K-Lab. La struttura va sempre agganciata a muro per
maggiore sicurezza.
Vincoli
In assenza di copri fi anchi, non è possibile affi ancare basi, pensili e
colonne basse direttamente ai lati dell'armadio Can-Do. Non è possibile
impiegare sopra armadi e inserire forni ed elettrodomestici con
apertura a libro. Per consentire eventuali regolazioni del meccanismo,
sul lato superiore degli armadi, deve esserci uno spazio minimo di
almeno 10 cm.
Compatibilità con le maniglie del modello K-Lab
Il sistema di ante complanari Can-Do è compatibile la maniglia Lever.
Characteristics
In the Can-Do cupboard, built-in appliances can be installed in three
different confi gurations, valid only in the version with doors, where the
oven is concealed:
a) Only oven h 60cm [23 5/8], with compartment h 64.4 cm [25 3/8]
b) Two stacked appliances h 46+46 cm [18 1/8 + 18 1/8], with
compartment h 97.4 cm [38 3/8]
c) Oven h 60 cm [23 5/8] + appliance h 46 cm [18 1/8], with
compartment h 112.2 cm [44 1/8]
In version with door(s) with appliances, Can-Do is 70 cm [27 1/2] deep.
Feasibility
If side facing panels are not fi tted, standard cupboards can be installed
directly alongside the Can-Do cupboard. In this case, the plinth of the
cupboard system is not the same depth and is not aligned on the same
plane. Can-Do cupboards can be placed side by side with no need
to use the side facing panel. The back panel of the Can-Do cupboard
can be customised with the materials and fi nishes available for K-Lab
programme doors. The structure must always be connected to the wall
for increased safety.
Constraints
If side facing panels are not fi tted, base, wall and low tall units cannot
be installed directly alongside the Can-Do cupboard. Top boxes cannot
be installed and ovens and appliances with folding doors cannot be
fi tted. To allow adjustment of the mechanism if necessary, there must
be a gap of at least 10 cm [3 7/8] at the top of cupboards.
Compatibility with K-Lab model handles
The Can-Do pantograph door system is compatible with the Lever
handle.