53
53
60W ELECTRONIC
AC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Electronic 450W
Compatible Dimming Coil: N/A
120 Volt Input Option:700AT060EL
277 Volt Input Option: N/A
150W ELECTRONIC
DC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Electronic 600W
Compatible Dimming Coil: N/A
120 Volt Input Option 700AT152EL
277 Volt Input Option: N/A
300W ELECTRONIC
DC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Electronic 600W
Compatible Dimming Coil: N/A
120 Volt Input Option: 700AT302EL
277 Volt Input Option: N/A
75W MAGNETIC
AC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Magnetic 450W
Compatible Dimming Coil: N/A
120 Volt Input Option: 700AT075T
277 Volt Input Option: 700AT075T277
300W MAGNETIC
AC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Magnetic 600W
Compatible Dimming Coil:
700DIM300 (P. 54)
120 Volt Input Option: 700AT300T
277 Volt Input Option: 700AT300T277
150W MAGNETIC
AC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Magnetic 600W
Compatible Dimming Coil:
700DIM150 (P. 54)
120 Volt Input Option: 700AT150T
277 Volt Input Option:700AT150T277
ADDING POWER TO KABLE LITE WITH
POWER FEED CANOPIES
Products presented here will help power and assist in mounting a MonoRail system while maintaining the clean and elegant lines of
the installation. The many options available will fit every installation need. Note: Power Feed Canopy options act as mounting plates
only. For powering a MonoRail system, see Remote Transformers (below) and Surface Transformers (P. 54).
SINGLE-FEED REMOTE TRANSFORMERS*
SINGLE-FEED CANOPIES
Use with one single-feed remote transformer
USE THESE CANOPIES WITH
THESE TRANSFORMERS
4" ROUND SINGLE-FEED*
Mounts to Standard 4" junction box with round plaster ring
(provided by electrician)
Compatible with any rigid standoff (P. 52)
Feed length: 24"
Add one pair of hardwire feeds (P. 54) to drop from
ceiling greater than feed length
700KP4C24S (SATIN NICKEL)
2" SQUARE SINGLE-FEED*
Mounts to special 2" square junction box (included)
Compatible with any rigid standoff (P. 52)
Feed length: 24"
Add one pair of hardwire feeds (P. 54) to drop from
ceiling greater than feed length
700KP2C24S (SATIN NICKEL)
*REMOTE TRANSFORMERS INSTALL IN AN ACCESSIBLE LOCATION BEHIND THE CEILING OR WALL; REQUIRES A POWER FEED, SOLD SEPARATELY.
**AS A GENERAL RULE WHEN USING LED FIXTURES, WE DO NOT RECOMMEND USING GREATER THAN 70% OF SPECIFIED MAXIMUM WATTAGE ON THE TRANSFORMER DUE TO INRUSH
CURRENT UNLESS NOTED OTHERWISE. FOR ASSISTANCE, PLEASE CONTACT OUR TECHNICAL SUPPORT DEPARTMENT, P: 847-410-4400; EMAIL: TECHSUPPORT@VISUALCOMFORT.COM
300W MAGNETIC
AC TRANSFORMER
Input Voltage: 1x120V
Output Voltage: 12V
Compatible Dimmer:
Low-Voltage Magnetic 600W
Compatible Dimming Coil:
700DIM300 (P. 54)
120 Volt Input Option: 700AT300T
277 Volt Input Option: 700AT300T277
DUAL-FEED REMOTE TRANSFORMER*
DUAL-FEED CANOPY
Use with one dual-feed remote transformer (isolating connectors included)
USE THIS CANOPY WITH
THIS TRANSFORMER
4" ROUND DUAL-FEED**
Mounts to Standard 4" junction box with round plaster ring
(provided by electrician)
Shortest compatible rigid standoff 2" (P. 52)
Feed length: 24"
Add two power extender to drop from the ceiling greater
than shortest compatible rigid standoff
700KP4C424S (SATIN NICKEL)
