V L 414 112
stainless steel
Width 15.5 cm
Air extraction / Air recirculation
Motorless
Installation accessories
A D 410 040
Flexibel connecting piece for VL 200
DN 150 flat
A D 851 041
Connecting piece for extension with
flat duct DN 150 for extra deep worktop
V A 420 004
Connection strip for combination with
other Vario appliances of the 400 series
for flush mounting
V A 420 010
Connection strip for combination with
other Vario appliances of the 400 series
for surface mounting
Special accessories
A A 400 510
Window contact switch
A A 414 010
Ventilation moulding for VL 414 next to
gas appliance.
Installation accessories for the air
recirculation ducts you will find at the
pages 280 – 292.
Combinable with:
Vario cooktops 400 series
VI 46x
VI 42x
VG 42x
VG 41x
VP 4xx
VR 4xx
Vario downdraft ventilation 400 series
V L 414
–
Can be combined perfectly flush
with other Vario appliances of the
400 series
–
Precision crafted 3 mm stainless
steel
–
Solid stainless steel control knob
–
Highly efficient, low noise
ventilation system especially with
remote fan unit AR 410 110
–
Function for automatic,
sensor-controlled power adjustment
depending on the build-up of
cooking vapours
–
Minimal planning and easy
installation
Output
Power levels depend on the remote fan
unit, see table on page 300 – 301.
Features
Control knobs with illuminated ring
included in delivery.
3 electronically controlled power levels
and 1 intensive mode.
Automatic function with sensor-controlled
run-on function.
Large-scale metal grease filter with
high grease absorption.
Grease filter, dishwasher-safe.
Grease filter and activated charcoal
filter saturation indicator.
Airflow-optimised interior for efficient
air circulation.
Interval ventilation, 6 min.
Enamelled ventilation grille,
dishwasher-safe.
Air exhaust bend included in delivery.
Overflow 250 ml capacity.
Cooktop-based ventilation control
(with suitable cooktop).
Home network integration for digital
services (Home Connect) either via
cable connection LAN (recommended)
or wireless via WiFi.
The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country. For further
information please check:
home-connect.com.
Please read additional information on
Home Connect on page 416.
Consumption data
Consumption data is referred to a
configuration with the remote fan unit
AR 403 122.
Energy efficiency class A+ at a
range of energy efficiency classes
from A+++ to D.
Energy consumption 40.4 kWh/year.
Ventilation efficiency class A.
Ilumination efficiency class -.
Grease filter efficiency class B.
Sound level min. 57 dB / max. 71 dB
normal mode.
Planning notes
Refer to the table on page 297 for the
matching remote fan units for air
recirculation or air extraction mode.
Please refer to page 300 – 301 for
recommended configurations of
downdraft ventilations and remote fan
units and the needed ducting
elements.
For each VL one remote fan unit is
recommended.
Maximum cooktop width between two
VL: 60 cm.
Vario cooktops like Vario electric grill
and Vario gas wok should be placed
between 2 VL.
In case of Vario electric grill,
recirculation is not recommended.
If operated next to gas appliances, the
ventilation moulding AA 414 010 is
recommended to ensure maximum
performance of the cooktop.
Appliance can be snapped into the
worktop from above.
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific location of the cut-out and
the knob positions may vary.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type of
installation, the corresponding
connection strip must be provided.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
When installing a ventilation hood with
air extraction mode and a chimney-vent-
ed fireplace, the power supply line of
the ventilation appliance needs a
suitable safety switch.
Please read the installation details
regarding air ducting on
page 132 – 136.
Please read additional planning notes
on page 232 – 235.
Connection
Total connected load 10 W.
Connecting cable 1.75 m, pluggable.
Plan a LAN cable.
