367
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Pan
PAN
65
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Protection against
impact.
IK 07 - 2,00 joule
The fitting is
equipped with
2 cable input
Ømax 10 mm
Wall lamp
Floor installation
Ceiling lamp
• Spotlight for installation on wall, ceiling and floor or as a
bollard light.
• Configuration: die-cast aluminium frame and cap, EN AB-
47100 alloy (low copper content) and extruded aluminium
structure/pole. Glass diffuser: transparent, fixed to the
aluminium structure through a robotic gluing system. The
wiring unit is fixed to the installation surface and is fully
adjustable on the vertical axis, while the mitting unit is
fixed to the wiring unit and has a +/- 135° rotation on the
horizontal axis.
• Double layer coating for high resistance to corrosion: the
aluminium components are painted with a double coat
using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: wiring through two cable holders (5mm<Ø<9mm
cable) and a quick connect terminal block. We recommend
installation on a concrete basement or surface, directly
with bolts or through a dedicated fixing plate (to be ordered
separately). Outdoor use requires suitable flexible cables
assuring the watertightness of the cable gland.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
.12 Forest Green
