238
239
Back System
BACK SYSTEM CON ACCESSORI FIT vista esplosa
BACK SYSTEM WITH FIT ACCESSORIES exploded view
BASI E COLONNE CON ACCESSORI FIT vista esplosa
BASE CABINETS AND TALL UNIT WITH FIT ACCESSORIES exploded view
(11)*
(1)
(3)*
(5)
(7)
(8)
(6)
(2)
(4)
(9)
(10)
(12)
(4)
(6)
(1)
(13)
(5)
(1)
Characteristics
Back System structures offer linear and corner solutions and specifi c solutions
for the installation of appliances, service washing zones and mirror back
panels. Various types of accessories, including Fit, can be installed inside the
compartments provided, in order to create custom compositions. The heights
of all accessories can be varied. Modules h 76 – 87 cm [29 7/8” – 34 1/4”] are
only for inclusion in linear wall compositions.
Feasibility
The width of some modules can be customised; in this case, only the
melamine shelves, glass shelves with aluminium frame, and clothes hanging
rail can be installed. The height of the uprights h 213 – 249 – 273 cm [83 3/4” -
98” - 107 3/8”] can be reduced. The depth of uprights can be reduced down
to a minimum of 35 cm [13 3/4”]. Modules h 76 - 87cm [29 7/8”- 34 1/4”] may
be placed 10 cm [3 7/8”] from the wall to allow the use of worktops d 70 cm
[27 1/2”], provided the sides are not visible, meaning that they are next to a
side facing panel, a wall or a corner cupboard. Led lighting, controlled via a
remote switch, can be incorporated in the uprights of the tall unit structures.
An electrifi ed rail can be fi tted on the back panel of tall unit modules.
Constraints
A gap of at least 4 cm [1 5/8”] must be left between the top edge of the
uprights and any ceiling above. At the end of the composition, a gap of at
least 4 cm [1 5/8”] must be left between the end upright and any wall. Non
right-angle corners are not possible. Ovens with laterally hinged doors cannot
be installed. Top boxes cannot be used. The creation of modules without
internal accessories is not recommended. The sink tall unit structure must
include a back cladding in the worktop material to protect the melamine back
panel of the module itself. Led lighting cannot be fi tted in this module.
The glass rack cannot be installed on the mirror back panel.
Caratteristiche
Le strutture Back System prevedono soluzioni lineari, ad angolo e dedicate
per l’inserimento di elettrodomestici, zone lavaggio di servizio e schiene a
specchio. All’interno dei vani previsti è possibile inserire diverse tipologie di
accessori, compresi i Fit, per realizzare composizioni personalizzate. Tutti gli
accessori sono spostabili in altezza. I moduli h 76 – 87 cm [29 7/8” – 34 1/4”]
sono previsti solo in composizioni lineari a parete.
Fattibilità
Sono previsti dei moduli su cui è possibile personalizzare la larghezza, in
questo caso si potranno inserire solamente i ripiani in melaminico o con telaio
alluminio e vetro ed eventualmente l’appendiabiti. È possibile ridurre in altezza
le spalle h 213 – 249 – 273 cm [83 3/4” - 98” - 107 3/8”]. È possibile ridurre la
profondità delle spalle fi no alla misura minima di 35 cm [13 3/4”]. I moduli
h 76 – 87 cm [29 7/8” – 34 1/4”] possono essere scostati dalla parete di 10 cm
[3 7/8”] per impiegare piani p 70 cm [27 1/2”], a condizione che i fi anchi non
siano a vista e quindi siano adiacenti ad un copri fi anco, ad una parete o un
armadio ad angolo. Nelle spalle delle strutture colonne è possibile inserire
l’illuminazione led, attivabile tramite interruttore remoto. È possibile attrezzare
la schiena posteriore dei moduli colonna con una barra elettrifi cata.
Vincoli
È necessario lasciare almeno 4 cm [1 5/8”] tra il lato superiore delle spalle
ed un eventuale soffi tto. A fi ne composizione è necessario lasciare almeno
4 cm [1 5/8”] tra la spalla terminale ed una eventuale parete. Non è possibile
realizzare soluzioni fuori squadro. Non è possibile inserire forni con apertura
battente. Non è possibile utilizzare sopra armadi. È sconsigliato realizzare
dei moduli privi di accessori interni. All'interno della struttura colonna per
lavello è obbligatorio inserire uno schienale in materiale piano, in modo
da salvaguardare la schiena in melaminico del modulo stesso. In questo
modulo non è possibile inserire l’illuminazione led. Non è possibile inserire i
portabicchieri sulla schiena a specchio.