84
- Product Information
Product Information
GLASS SIDE FACING PANELS
All-round frame in 117 x 8 mm silver anodised
aluminium section. Panel in 4 mm extra clear tempered
glass cold screen printed on inside in opaque colour
(see ernestomeda range colours).
Icon Programme.
STONE SIDE FACING PANELS
Made from stone panel 20 mm thick; the edges have
a sanded, polished finish.
bIO-RESIN SIDE FACING PANEL TH. 12 MM.
Made from multi-layered okumé wood boards 8 mm
thick with emission having minimal formaldehyde
content (Class E1 under UNI/EN 13986/2005
standard). Boards are water-repellent and clad on
both sides with HPL (maximum strength) laminate and
finished with Bio-resin in the Ernestomeda colours on
the edges and surfaces.
bIO-RESIN SIDE FACING PANEL TH. 20/22 MM.
Made from multi-layered poplar wood boards 16/18
mm thick with emission having minimal formaldehyde
content (Class E1 under UNI/EN 13986/2005
standard). Boards are water-repellent and clad on
both sides with HPL (maximum strength) laminate and
finished with Bio-resin in the Ernestomeda colours on
the edges and surfaces.
5. 7 SPECIAL UNITS
TORNASOLE
Structural frame in satined steel. Load capacity 40 kg
(evenly distributed).
Methacrylate cupboard section. In gloss white and
gloss black methacrylate, 8 mm thick. The cupboard
has 5 sections with shelves.
Aluminium cupboard section. Made from panels of
“DOLUFLEX”, a structural panel comprising a thin
sheet of corrugated aluminium 0.3 mm thick having
trapezoid pattern, glued between two flat sheets
of aluminium having thickness 1 mm (inside sheet)
and 0.3 mm (outside sheet), giving total thickness
8 mm. This combination provides an exceptionally
lightweight panel with outstanding mechanical
bending and compression strength. The cupboard
has 5 sections with shelves.
bOHEME
Larder cupboard in Canaletto walnut with glass door
comprising a Canaletto walnut frame 13 cm deep and
2+2 layered glass with coloured safety films in Merlot,
Pinot and Chardonnay colours. Wooden shelves are
contained within the thickness of the door. Carcase
in Canaletto walnut throughout. Internal lighting by
means of LEDs. The load capacity of a single glass
door of the “BOHEME” cupboard is 15 kg.
CAN-DO
Cupboard system with pantograph doors, totally
compatible with the kitchen’s modular scheme.
Appliances can be installed both visible (doors
shaped so that the appliance is visible and accessible)
and concealed (the doors close the appliances inside
the cupboard). CARCASE: standard wood particle
board panels (see chap.1). The back panels are
standard (see point 1.3A) but the inside finish can be
customised with “thermo wood” melamine paper or
with veneer coloured to match the cupboard door (see
colours point 2.1). FRONTS: standard (see chap.2).
INTERNAL FITTINGS: as well as the standard shelves
and internal drawers/baskets, bottle racks shelves
can also be fitted (see point 1.2)
INDOOR
Cupboard with retracting door system. Appliances
can be fitted. CARCASE: standard wood particle
board panels (see chap.1). The back panels are
standard (see point 1.3A) but the inside finish can be
customised with “thermo wood” melamine paper or
with veneer coloured to match the cupboard door
(see colours point 2.1). FRONTS: standard (see
chap.2). INTERNAL FITTINGS: as well as the standard
shelves and internal drawers/baskets, cupboards can
be fitted with a pull-out work surface, made from 18
mm thick wood particle board panels with emission
having minimal formaldehyde content (Class E1 under
UNI EN 13986/2005). Panels are water repellent
(V100 standard), edged with wood slice veneer 1 mm
thick and covered with 0.6 mm thick wood veneer
(heat-treated oak, oak) with TIP-ON opening system
and retainer in closed position, three-drawer drawer
unit, bottle rack shelves and steel shelves (see point
1.2).
FLEX
Wall unit with a single door with a combined slide-
and-turn opening system (opening: door first slides
upward and then turns). CARCASE: standard wood
particle board panels (see chap.1). Side panels with
all-round frame in chemical-free anodised aluminium
and panel 4 mm thick in the same finish as the
carcase or customised in wood, lacquered and glass
materials. FRONTS: only available with the door
28 mm thick with aluminium frame from the ICON
programme (see chap.2) plus the clear grey and
frosted glass versions. INTERNAL FITTINGS: “mix”
glass shelves as standard.
IN LINE WALL UNIT
Single door wall unit with lift-up door, with door travel
system integral in side panel.
STRUCTURE: Top, bottom and side panels in
standard particle board (see point 1). FRONTS: only
door th. 20 mm is available, with aluminium frame and
tempered glass panel, or door (in versions available
with Soul programme). INTERNAL EQUIPMENT:
