59
Product Information -
LACQUERED GLASS FINISHING SIDE PANEL - ICON
Made from wood particle board 14 mm thick of the
same type as the carcase. Outside clad with pane
of tempered glass backpainted with polyurethane
varnish in the Ernestomeda range colours. Inside with
matt melamine finish (Optical 3D).
Programme: Icon
LAMINAM AND kERLITE STONEWARE SIDE FINISHING PANEL
Made from 14 mm thick wood particle boards with the
same characteristics as those used for the carcase.
Outside clad with a stoneware panel.
Inside matt melamine finish (Opticall 3D).
Programme: Icon
STONE+ SIDE FINISHING PANEL
Made from 14 mm thick wood particle boards with the
same characteristics as those used for the carcase.
Outside clad with a Stone+ panel.
Inside matt melamine finish (Opticall 3D).
Programme: Icon
STANDARD EQUIPMENT
» Wall unit mounting fixtures: the mounting fixtures
for the wall units are tested to support loads of up
to 70 kg each and are fitted with hole plugs in the
carcase colour for pale grey and mustard and silver
colour for Optical 3D.
» The mounting bracket is firmly secured to the
unit (maximum strength) by means of 3 dowels
in the side and two screws in the side and one
in the top. The wall unit mounting accessory has
horizontal and vertical adjustment (the maximum
range is 25 mm horizontal and 18 mm vertical).
» A hand screwdriver should be used for all
adjustments; mechanical screwdrivers without
clutch must never be used.
» Sink base unit bottom: The sink base unit is
protected by a gloss AISI 430 stainless steel bottom
tray, which protects the unit from accidental water
leaks, condensate from the siphon and detergent
corrosion.
» Fridge tall unit bottom: The bottom of the
refrigerator tall unit, in thermoplastic material,
is specially designed to collect and drain off any
water leaks, to protect unit from water seepage
or condensate from the fridge for pale grey and
mustard carcase..
» Fridge tall unit bottom: The bottom of the
refrigerator tall unit is designed to convey the
air flow to the zone where the fridge motor is
installed, with no need for ventilation grilles in the
aluminium plinth. The shelf supporting the fridge is
