86
- Product Information
Product Information
HANDY
Open cabinet in satined finish sheet stainless steel th.
0.8 mm with “forex” (expanded material) interior.
Visible edging in gloss steel.
Internal support by means of epoxy powder coated
metal brackets.
OVEN CONTAINER
Carcase built to contain ovens of standard modular
sizes.
In satined finish AISI 304 sheet stainless steel th. 0.8
mm.
5. 8 MISCELLANEOUS
“bANDE” MIDWAY PANEL STRIP
Made from solid wood 18 mm thick, veneered on
inside/outside in bleached Canaletto walnut. Steel
finish aluminium end caps 5 mm thick.
EkOTEk PENINSULA AND SINk
The ekotek peninsula and sink are made from a non
toxic blend of polyester resin and mineral fillers.
Since it is coloured in the body, accidental cuts
can be removed using an abrasive detergent; tough
damage can be removed with fine sand paper. Any
tiny pinholes or slight surface imperfections are an
intrinsic characteristic of the product and do not in
any way influence its technical performance.
POWER SOCkET STALk
An accessory with 3 Schuko sockets for connecting
small appliances, which can be fitted in all types of
worktop. In worktops up to and including 60 mm
thick, a through hole 124 mm in diameter is required.
In worktops more than 60 mm thick, in addition to the
through hole 124 mm in diameter, an additional hole
is required in the underside of the worktop, in line with
the first hole: diameter = 160 mm, depth = worktop
thickness – 60 mm. When not in use, the stalk retracts
completely into the base unit underneath.
TEMPLATE MODULES
Template Module
Produced by press-forming a series of standard
wells designed to take special accessories on steel
worktops.
Template Accessories
Made entirely from satined AISI 304 15/10 stainless
steel they are designed to be fitted into the cavities
provided or placed anywhere the user wishes on
the worktop, because they have a rubber support
underneath and (on some models only) a shaped lid in
wood fibre board (MDF board to V100 standard) with
low formaldehyde emission (class E1 under the UNI
EN 13986/2005 standard), with lacquered finish over
matt black polyester primer.
EVERPURE® H-300 GREEN kIT
Residential microfiltration system, does not remove
the vital minerals from the water but reduces:
» Limescale - Lead - Asbestos Fibres
» Cystscome Giardia , Entamoeba Histolytica and
Cryptosporidium - Volatile organic compounds
(VOC)* including THMs*-Taste and smell of chlorine
» cloudiness - Moulds and algae - Iron oxide -
Manganese oxide - Oxides of sulphur - Dirt and
particles over 1/2 micron in size.
* Bacteriostatic control with KDF®.
KDF reduces limescale formation as tested by KDF ®
FLUID TREATMENT, INC. KDF provides bacteriostatic
control as tested by KDF ® FLUID TREATMENT, INC.
6. PARTITION SYSTEMS
6. 1 “BETWEEN” SYSTEM
“EMbOSSED” MATT LACQUERED “bETWEEN”
PANEL
Made from 28 mm thick ultralight MDF board with
emission having minimal formaldehyde content (class
E1 under UNI EN 13986/2005 standard). Varnishing
process: polyester primer on edges and surfaces,
“embossed” matt lacquered finish.
“FLAT MATT” LACQUERED “bETWEEN” PANEL
Made from 28 mm thick ultralight MDF board with
emission having minimal formaldehyde content (class
E1 under UNI EN 13986/2005 standard). Varnishing
process: polyester primer on edges and surfaces,
“Flat Matt” matt lacquered finish.
“GLOSSIX” GLOSS LACQUERED “bETWEEN”
PANEL
Made from 28 mm thick ultralight MDF board with
emission having minimal formaldehyde content (class
E1 under UNI EN 13986/2005 standard). Varnishing
process: polyester primer on edges and surfaces,
clear gloss lacquer finish (where required) in the
various range colours. Brushing and polishing.
