80
- Product Information
Product Information
5. 3 PLINTHS AND VISIBLE FEET
PLAIN ALUMINIUM PLINTH
In plain aluminium with scotch brite steel anodised or
silver anodised finish, epoxy powder varnished in matt
black, titanium or matt white colours, or veneered
with pale oak and open pore white ash. Fitted with
coextruded top and bottom seals. Fixed to the feet
of the unit with special plastic hooks that allow easy
removal for cleaning
Available in heights 70, 100 and 150 mm.
FINE RIbbED ALUMINIUM PLINTH
In fine ribbed aluminium with scotch brite steel
anodised finish, with extruded top and bottom seal.
Fixed to the feet of the unit with special plastic hooks
that allow easy removal for cleaning
Available in height 150 mm.
STAVED ALUMINIUM PLINTH
In “staved” aluminium with scotch brite steel anodised
or silver anodised finish, with extruded top and bottom
seal. Fixed to the feet of the unit with special plastic
hooks that allow easy removal for cleaning. Available
in heights 100 and 150 mm.
LACQUERED ALUMINIUM PLINTH
In phosphate coated plain aluminium varnished in the
matt lacquered and gloss lacquered colours in the
ernestomeda range. Fitted with coextruded top and
bottom seals. Fixed to the feet of the unit with special
plastic hooks that allow easy removal for cleaning
Available in heights 70-100-150. mm.
ALUMINIUM PLINTH WITH bIO-RESIN FINISH
In smooth aluminium, with BIO-RESIN finish in the
Ernestomeda colours. They have co-extruded seals
on the top and bottom edges. They are secured to
the feet of the unit with special plastic hooks to allow
easy removal for cleaning. Available in height 70 mm.
FEET H. 7 CM
Tough
thermoplastic
foot
support
plate
with
thermoplastic snap connection for foot, complete
with internal adjuster insert in metal alloy. Adjustment
+20 mm/- 5 mm. The rear foot is adjusted on the front
foot by means of a hexagonal galvanised steel rod
which connects the two feet (front/back).
FEET H. 10/15 CM
Tough
thermoplastic
foot
support
plate
with
galvanised steel snap connection for foot. Adjustment
+20 mm/- 5 mm.
5. 4 LIGHTING SYSTEMS
LED LINE
Flush inset anodised aluminium bar with anti-dazzle
opaque polycarbonate shade and continuous row of
warm light LEDs with two operating settings: 100%
and 50% brightness. Each bar may absorb from a
minimum of 7.5 W to a maximum of 23 W.
ODO LED
Semi-flush inset aluminium bar with powder varnish
finish (pale grey and mustard) with continuous row of
cold light LEDs with power of 1W each. The bar has
a switch-on system with activator and is equipped
with control unit; it is able to take from 3 to 13 LEDs,
depending on size.
SUNNY SPOTLIGHT
Inset spotlight with 74 mm square metal fitting,
comprising 16 energy-saving thermoplastic LEDs
with total power absorption 1.25 W. The optional
external “touch LED” switch can operate with powers
of up to 30 W.
ILLUMINATING bOTTOM FOR WALL UNITS
In silver anodised aluminium, enclosed on the inside
by a decorated tempered float glass shelf 6 mm thick,
fitted with neon light on the inside.
SLIDE
Semi-inset T2 13W electronic fluorescent light with
adjustable angle body (45° towards wall, 45° towards
front).
CAMILLA
Circular tubular light in extruded aluminium with
polycarbonate shade, for non-inset installation, T5
fluorescent lamp with minimum power absorption 6
W - maximum 12 W.
LUMINELLA
Polycarbonate fluorescent light with electronic
transformer. The lamp inside has minimum power
absorption 8 W - Maximum 21 W.
CORNER
Anodised aluminium light with clear polycarbonate
shade, complete with electronic transformer. The
lamp inside has minimum power absorption 8 W -
Maximum 21 W.
5. 5 SHELVES
WOODEN SHELF 30 MM THICk
Made from 28 mm thick wood particle board panel
with emission having minimal formaldehyde content
(Class E1 under UNI EN 13986/2005 standard).
Panels (V20 standard) are edged with wood and
covered with wood slice veneer 0.7 mm thick on both
sides (European oak, ash, bleached Canaletto walnut,
American walnut).
WOODEN SHELF 50 MM THICk
Hollow shelf made from fibre board panels 6 mm
thick with honeycomb filling. Emissions with minimal
formaldehyde content (class E1 under UNI EN
13986/2005 standard). Panels (V20 standard) are
edged with solid wood and covered with wood slice
