Order information
Code
Package
EK-BQ1-TP
1 pcs.
Configuration and commissioning
By means of application program Quickinstall
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
CoolMasterNet with
integrated KNX module
GATEWAY
Description
CoolMasterNet Ekinex® is a plug and play interface for bidirectional data exchange
between the KNX home automation system and the bus communication system
dedicated to air conditioning through VRV / VRF and splits. CoolMasterNet allows
the KNX system to individually monitor and control all the units connected to the bus
system dedicated to air conditioning. The LCD touch-screen also allows the direct
control of every unit. Among the available* controls there are:
- on/off
- mode (Cool, Heat, Auto, Fan)
- fan speed
- temperature setpoint
- room temperature feedback
- error code
The dedicated CoolRemote App allows the remote login via web through smartphone,
tablet or PC to verify the status of the system and possible error codes (where
available) and perform basic controls such as on/off (individual or collective), setup of
the temperature setpoint, selection of the operating mode and fan speed. The device
is equipped with communication lines for the following manufacturers: Mitsubishi
Electric, Daikin, Toshiba, Panasonic, Sanyo, Hitachi, Mitsubishi Heavy Industries, LG,
Samsung, and Gree. The device integrates a KNX bus communication module and
is realized for wall-mounting. The device is powered by a SELV 12-24 Vdc voltage.
Main features
• Plastic material
• Colour LCD touch-screen display
• Green (on/off connection) and orange (Tx/Rx indication LED
• Connection to bus line with KNX terminal block
• RS232 (ASCII), RS485 (Modbus RTU), Ethernet (ASCII, Modbus IP), mini
USB (maintenance) ports
• Wall-mounting
• Weight 270 g
KNX module
• Pre-installed in factory
• Activated through assignment of L3 communication line
• 128 default group addresses (expandable to 1.024)
Dimensions [mm]
109
35
90
156
Metering
DIN-RAIL MOUNT MODULES
EK-ME1-MDB
Network
analyzer (basic)
EK-MEK-xx
Kit network
analyzer
(enhanced) and
Rogowski coils
EK-ME1-06T
6 A three-phase
MID energy
meter
EK-ME1-80M
80 A single-
phase MID
energy meter
EK-ME1-80T
80 A three-
phase MID
energy meter
EK-MC1-MD
Modbus
communication
module
Three-phase energy meter
•
•
•
-
•
-
Single-phase energy meter
-
-
-
•
-
-
Direct connection
-
-
•
•
•
-
Rogowski coil
•
•
-
-
-
-
Fully bi-directional four quadrants measurements for all energies and powers
•
•
•
•
•
-
Main electrical parameters measured and displayed
for a cost-effective consumption analysis
•
•
-
-
-
-
For 3 / 4 wire networks with balanced or unbalanced load
•
•
•
-
•
-
Class B according to EN 50470-3
-
-
•
•
•
-
Tariff Input
-
-
•
•
•
-
2 S0 outputs for energy pulse emission
-
-
•
•
•
-
1 configurable digital output
•
•
-
-
-
-
Possibility to record MIN / AVG / MAX values for all powers
•
•
-
-
-
-
LCD-Display
•
•
•
•
•
-
Optical port for communication
-
-
•
•
•
-
Sealable cover to prevent tampering
•
•
•
•
•
-
MID Certificate
-
-
•
•
•
-
Modbus RTU (8N1) and ASCII (7E2) protocol
•
•
-
-
-
•
- RS485 port
-
-
-
-
-
•
- Communication speed: 300 ÷ 115200 bps
-
-
-
-
-
•
- Termination resistor integrated in the module
-
-
-
-
-
•
- Optical port for communication
-
-
-
-
-
•
- Communication speed: 38400 bps
-
-
•
•
•
-
KNX protocol
-
-
-
-
-
-
- Communication speed: 9600 bps
-
-
-
-
-
-
Plug-in software
•
•
-
-
-
-
Mounting on standard 35 mm rail (EN 60715)
•
•
•
•
•
•
TECHNICAL022EN
286
287
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index
