Description
The Ekinex® EK-GC1-TP 4-fold RGBW LED dimmer allows to regulate independently
the light intensity emitted by 4 LED strips at 12/24 Vdc or, alternatively, to regulate
the light intensity and the colour emitted by a RGB or RGBW LED strip. The device
is suitable for use with LED strips powered at constant voltage. The selection of the
colour can be made optionally in HSV or RGB mode. Scenarios, predefined sequences,
sequence repetition and random functions are available; the dimming speed and the
holding time are programmable. The device is fitted with membrane pushbuttons for
manual command and LEDs for status indication; a pushbutton allows the switching
between automatic or manual operation modes. The device integrates a KNX bus
communication module and is realised for mounting on a standard 35 mm DIN-rail.
The device is powered by the KNX bus and requires an additional 12...30 Vdc to supply
the controlled loads.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LEDs for status indication of outputs
• Pushbutton for switching operating mode (normal / programming)
• CH pushbutton for individual or simultaneous channels control
• HSV / RGB pushbutton colour control mode
• Auxiliary dry contact to disconnect load power supply during standby
• Connection to bus line with KNX terminal block
• Connection of outputs and 12-30 Vdc power supply with screw terminals
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
Technical data
Power supply
• Voltage (strip LED): max 30 Vdc, 16 A
• Voltage (control): 30 Vdc by KNX bus
Outputs
• Number: 4
• Load current for each channel: 4 A
Products included
Delivery includes a terminal block for connection to the bus.
+
-
KNX
C1/R
bus KNX
Dev.
Line
Area
+
+
12..30 VDC
-
C2/G
C3/B
C4/W
-
-
-
-
-
230V~/6A max
12..30 VDC
L
N
110-230 Vac
50/60 Hz
(R)
LED strip
LED strip
(G)
LED strip
(B)
LED strip
(W)
L
N
+
�
Alimentatore LED
12...30 Vdc
Description
The Ekinex® 4-fold 0-10 V actuator EK-GF1-TP can be used as 0-10 V control output
device or, alternatively, for controlling dimmerable LED power supply units. When used
for LED controlling, the selection of the colour can be made optionally in HSV or RGB
mode. Scenarios, predefined sequences, sequence repetition and random functions
are available; the dimming speed and the holding time are programmable. The device
is fitted with membrane pushbuttons for manual command and LEDs for status
indication; a pushbutton allows the switching between automatic or manual operation
modes. The device integrates a KNX bus communication module and is realised for
mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LEDs for status indication of outputs
• Pushbutton for switching operating mode (normal / programming)
• CH pushbutton for individual or simultaneous channels control
• HSV / RGB pushbutton colour control mode
• Connection to bus line with KNX terminal block
• Connection of outputs with screw terminals
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
Technical data
Power supply
• Voltage (control): 30 Vdc by KNX bus
• Rated output stage supply voltage: 230Vac, max 6W
Outputs
• Number: 4
• Range: 0-10 V or 1-10V
• Max. current for each channel: 50 mA
Products included
Delivery includes a terminal block for connection to the bus.
+
�
KNX
bus KNX
Dev.
Line
Area
L
N
100-230 Vac
50/60 Hz
�
+ Power driver
�
+ Power driver
�
+ Power driver
�
+ Power driver
Versions
Code
EK-GF1-TP
Documentation
For further details, consult the technical sheet
STEKGF1TP_EN.pdf, available for download from www.ekinex.com
Versions
Code
EK-GC1-TP
Documentation
For further details, consult the technical sheet
STEKGC1TP_EN.pdf, available for download from www.ekinex.com
4-fold RGBW LED dimmer
DIMMERS
White / Monochrome
independent,
up to 4 loads
(up to 4A each)
Type of load
Description
Link
Dynamic white,
up to 2 channels
(up to 4A per output)
RGBW, 1 channel
1 RGB channel +
1 independent monochrome
channel
4-fold 0-10 V actuator
DIMMERS
SMART LIGHTING
SMART LIGHTING
66
67
