H1
C
A
B
B
170
C
A
B
B
LP
12,5
FINISHED FLOOR LEVEL
�
HP
H H1
LP
HP
FW
S
FW
S
IP
Flush sliding pocket door systems
for single door; wiring ready
on both sides
ECLISSE
SYNTESIS® LUCE DOUBLE
SYSTEMS FOR DOUBLE DOOR - Measures related to Italian standards, other dimensions available
PASSAGE SIZE
OVERALL DIMENSIONS
DOOR PANEL*
A x H
B
C x H1
LP
HP
1200 x 2000/2100
737
2660 x 2060/2160
615÷635
1992/2092
1400 x 2000/2100
837
3060 x 2060/2160
715÷735
1992/2092
1600 x 2000/2100
937
3460 x 2060/2160
815÷835
1992/2092
1800 x 2000/2100
1037
3860 x 2060/2160
915÷935
1992/2092
2000 x 2000/2100
1137
4260 x 2060/2160
1015÷1035
1992/2092
STUD WALL
NON STANDARD SIZES
NOTES
AVAILABLE ACCESSORIES
Passage width from 1200
to 2600 mm.
Passage height from 1000
to 2700 mm.
Frames manufactured in
increments of 50+50 mm
(A) and 50 mm (H).
Half sizes need bespoke
door panels
(e.g. A=1300 mm)
The passage A is reduced by 14 mm.
Positions for the electrical boxes are supplied as standard on both
sides of one pocket
Provided with 4 electrical boxes
Max door thickness 40 mm (including any frames for glass door).
Max. door weight 100 Kg.
Wooden door panel measures only.
For safety reasons ECLISSE recommends that the door panel is left
protruding by 80 mm.
If needed, the adjustable door stop allows to modify the real passage
size.
In order to make the door completely disappear a milling is required.
The milling for the door guide must have the following dimensions:
7 x 15 mm.
ECLISSE
SYNTESIS® BASEBOARD
Double doors coordination
for ECLISSE SYNTESIS®
ECLISSE BIAS®
ECLISSE BIAS®DS
Anti-warp profile
WARNING
20
20
20
40
The
door
panel
for
ECLISSE
SYNTESIS® LUCE must be milled
along the upper and lower profiles,
as shown in the drawings (milling
not required on glass doors).
THICKNESS AVAILABLE
Finished Wall= FW
Studwork= S
Internal Passage= IP
150
S=100 mm with two plasterboard layers but only one
layer on the pocket on each side
54
Dimensions are given in mm.
SYNTESIS® LUCE
77
