C
A
B
50
H1
170
C
A
B
50
LP
12,5
HP
H H1
LP
HP
FINISHED FLOOR LEVEL
�
FW
S
FW
S
IP
Flush sliding pocket door systems
for single door; wiring ready
ECLISSE
SYNTESIS® LUCE SINGLE
SYSTEMS FOR SINGLE DOOR - Measures related to Italian standards, other dimensions available
PASSAGE SIZE
OVERALL DIMENSIONS
DOOR PANEL*
A x H
B
C x H1
LP
HP
600 x 2000/2100
737
1380 x 2060/2160
615÷635
1992/2092
700 x 2000/2100
837
1580 x 2060/2160
715÷735
1992/2092
800 x 2000/2100
937
1780 x 2060/2160
815÷835
1992/2092
900 x 2000/2100
1037
1980 x 2060/2160
915÷935
1992/2092
1000 x 2000/2100
1137
2180 x 2060/2160
1015÷1035
1992/2092
THICKNESS AVAILABLE
Finished Wall= FW
Studwork= S
Internal Passage= IP
150
S=100 mm with two plasterboard layers but only one
layer on the pocket on each side
54
Dimensions are given in mm.
STUD WALL
NON STANDARD SIZES
NOTES
AVAILABLE ACCESSORIES
Passage width from 600
to 1300 mm.
Passage height from 1000
to 2700 mm.
Frames manufactured in
increments of 50 mm.
Half sizes need bespoke
door panels
(e.g. A=650 mm).
The passage A is reduced by 7 mm.
Positions for the electrical boxes are supplied as standard on both
sides of one pocket
Provided with 2 electrical boxes
Max door thickness 40 mm (including any frames for glass door).
Max. door weight 100 Kg.
Wooden door panel measures only.
For safety reasons ECLISSE recommends that the door panel is left
protruding by 80 mm.
If needed, the adjustable door stop allows to modify the real passage
size.
In order to make the door completely disappear a milling is required.
The milling for the door guide must have the following dimensions:
7 x 15 mm.
ECLISSE
SYNTESIS® BASEBOARD
ECLISSE BIAS®
ECLISSE BIAS®DS
Anti-warp profile
WARNING
20
20
20
40
The
door
panel
for
ECLISSE
SYNTESIS® LUCE must be milled
along the upper and lower profiles,
as shown in the drawings (milling
not required on glass doors).
SYNTESIS® LUCE
75
