ECLISSE
SYNTESIS® LINE DOUBLE
SOLID WALL
C
A
B
B
H1
C
A
B
B
LP
H H1
HP
LP
HP
FW
Br
FINISHED
FLOOR
LEVEL
�
FW
Br
IP
Flush sliding pocket door systems
for double door; no jambs, no architraves
SYSTEMS FOR DOUBLE DOOR - Measures related to Italian standards, other dimensions available
PASSAGE SIZE
OVERALL DIMENSIONS
DOOR PANEL*
A x H
B
C x H1
LP
HP
1200 x 2000/2100
735
2656 x 2060/2160
615÷635
1992/2092
1400 x 2000/2100
835
3056 x 2060/2160
715÷735
1992/2092
1600 x 2000/2100
935
3456 x 2060/2160
815÷835
1992/2092
1800 x 2000/2100
1035
3856 x 2060/2160
915÷935
1992/2092
2000 x 2000/2100
1135
4256 x 2060/2160
1015÷1035
1992/2092
THICKNESS AVAILABLE
Finished Wall= FW
Brick= Br
Internal Passage= IP
108
80
54
125
100
54
150
120
54
Dimensions are given in mm.
NON STANDARD SIZES
NOTES
AVAILABLE ACCESSORIES
Passage width from 1200 to 2600 mm if
thickness 125 and 150 mm
(up to 2000 mm if thickness 108 mm)
Passage height from 1000 to 2700 mm if
thickness 125 and 150 mm
(up to 2600 mm if thickness 108 mm)
Frames manufactured in increments of
50+50 mm (A) and 50 mm (H).
Half sizes need bespoke door panels
(e.g. A=1300 mm)
The passage A is reduced by 14 mm.
For A>2000 mm, only available wall thickness 125 and
150 mm
Max door thickness 40 mm (including any frames for
glass door).
Max. door weight 100 Kg.
Wooden door panel measures only.
For safety reasons ECLISSE recommends that the door
panel is left protruding by 80 mm.
If needed, the adjustable door stop allows to modify
the real passage size.
In order to make the door completely disappear a
milling is required.
The milling for the door guide must have the following
dimensions: 7 x 15 mm.
ECLISSE
SYNTESIS® BASEBOARD
Double doors coordination
for ECLISSE SYNTESIS®
ECLISSE BIAS®
ECLISSE BIAS®DS
Anti-warp profile
WARNING
20
20
20
40
The
door
panel
for
ECLISSE
SYNTESIS® LINE must be milled
along the upper and lower profiles,
as shown in the drawings (milling
not required on glass doors).
70
