ECLISSE
SYNTESIS® LINE SINGLE
SOLID WALL
C
A
B
50
H1
C
A
B
50
LP
FW
Br
IP
FINISHED FLOOR LEVEL
�
H H1
HP
LP
HP
FW
Br
Flush sliding pocket door systems
for single door; no jambs, no architraves
WARNING
20
20
20
40
The
door
panel
for
ECLISSE
SYNTESIS® LINE must be milled
along the upper and lower profiles,
as shown in the drawings (milling
not required on glass doors).
SYSTEMS FOR SINGLE DOOR - Measures related to Italian standards, other dimensions available
PASSAGE SIZE
OVERALL DIMENSIONS
DOOR PANEL*
A x H
B
C x H1
LP
HP
600 x 2000/2100
735
1378 x 2060/2160
615÷635
1992/2092
700 x 2000/2100
835
1578 x 2060/2160
715÷735
1992/2092
800 x 2000/2100
935
1778 x 2060/2160
815÷835
1992/2092
900 x 2000/2100
1035
1978 x 2060/2160
915÷935
1992/2092
1000 x 2000/2100
1135
2178 x 2060/2160
1015÷1035
1992/2092
THICKNESS AVAILABLE
Finished Wall= FW
Brick= Br
Internal Passage= IP
108
80
54
125
100
54
150
120
54
Dimensions are given in mm.
NON STANDARD SIZES
NOTES
AVAILABLE ACCESSORIES
Passage width from 600 to 1300 mm if
thickness 125 and 150 mm
(up to 1000 mm if thickness 108 mm)
Passage height from 1000 to 2700 mm if
thickness 125 and 150 mm
(up to 2600 mm if thickness 108 mm)
Frames manufactured in increments
of 50 mm
Half sizes need bespoke door panels
(e.g. A=650 mm)
The passage A is reduced by 7 mm.
For A>1000 mm, only available wall thickness 125 and
150 mm
Max door thickness 40 mm (including any frames for
glass door).
Max. door weight 100 Kg.
Wooden door panel measures only.
For safety reasons ECLISSE recommends that the door
panel is left protruding by 80 mm.
If needed, the adjustable door stop allows to modify
the real passage size.
In order to make the door completely disappear a
milling is required.
The milling for the door guide must have the following
dimensions: 7 x 15 mm.
ECLISSE
SYNTESIS® BASEBOARD
ECLISSE BIAS®
ECLISSE BIAS®DS
Anti-warp profile
68
