COMPOSE THE CODE FORMAT
All the products contained in the present catalogue are in compliance with the EC Certificate (EN 60598 +
second parts). CE mark ensure the products conformity to the safety requirements that are necessary for the
introduction of the product in the European Market.
TECHNICAL
03
CONTENT TERMINOLOGY
Class I: Luminaires that require an earth
connection. All parts of this type of product
where conductive parts could be touched,
and in case of defect can cause an electric
shock, require earth protection.
Class II: Luminaires that do not require earth
connection. Double insulated materials are
used in fabrication, therefore no parts could
cause an electric shock by accidental touch.
Class III: Luminaires for low voltage use (not
exceeding 24V) supplied through a safety
transformer such as LED’s or low voltage
lamps.
Below is terminology used in our publication
INGRESS PROTECTION RATING
The first number identifies the protection
degree against the entry of solid objects
The second number identifies the protection
degree against the entry of liquid
DEGREE OF ELECTRICAL PROTECTION
Kelvin (K): Represents the colour temperature
of a light source.
Below is a breakdown of typical
colour temperatures used in this publication:
3000K - Warm white light
4000K - Natural white light
5500K - Cool white light
Lumen (Lm): Technical terminology for how
much light a light source or luminaire emits.
LIGHT OUTPUT
EXTERIOR LIGHTING RECOMMENDATIONS
It is important that these recommendations
are adhered to, as they affect the lifespan
and warranty of our exterior luminaires.
First Number:
Solids
IP
6
5
Second Number:
Liquids
Ingress
Protection
Rating Example
0.
Not protected.
1.
Protection against the vertical falling of
water drops.
2.
Protection against the falling of water
with a maximum inclination of 15°.
3.
Protection against rain.
4.
Protection against water splashes.
5.
Protection against water jets.
6.
Protection against big waves.
7.
Protection against the effects of limited
periods of immersion.
8.
Protection against the effects of total
submersion indefinitely.
1.
Protection against the entry of solid
bodies with dimensions more than 50mm.
2.
Protection against the entry of solid
bodies with dimensions more than 12mm.
3.
Protection against the entry of solid
bodies with dimensions more than 2,5mm.
4.
Protection against the entry of solid
bodies with dimensions more than 1mm.
5.
Protection against the entry of dust.
6.
Complete protection against the entry
of dust.
Identify base code and choose D, X, Y, Z.
X - CRI (Color Rendering Index)
Z - Color of the fitting (es. 02)
Y - Color light temperature (Kelvin)
D - Diffuser or Lenses
Base code identifies the
family product and lenghts
