577
576
Technical features
Caratteristiche tecniche
TECHNICAL FEATURES WHITE BODY DOUBLE FIRING
CONFORMING TO EUROPEAN STANDARDS EN 14411 ISO 13006 APP. L (Group BIII GL EB > 10%)
CARATTERISTICHE TECNICHE BICOTTURA IN PASTA BIANCA
Conformi a Norme Europee EN 14411 ISO 13006 App. L (Gruppo BIII GL Eb ≤ 10%)
TECHNICAL FEATURES WHITE-BODY WALL TILES
CONFORMING TO EN 14411 ISO 13006 STANDARDS APP. L (Group BIII GL EB > 10%)
CARATTERISTICHE TECNICHE RIVESTIMENTI IN PASTA BIANCA
Conformi a Norme Europee EN 14411 ISO 13006 App. L (Gruppo BIII GL con Eb > 10%)
valid for 3D FORMS CROSS | 3D FORMS FLUTED | TYPIC | WAYS
valid for PERLINATO
water
absorption
EN ISO 10545-3
compliant
water
absorption
EN ISO 10545-3
compliant
modulus of
rupture
EN ISO 10545-4
compliant
glaze crazing
resistance
EN ISO 10545-11
resistant
chemical
resistance
EN ISO 10545-14
EN ISO 10545-13
Min. class 3
Min. class B
sizes
EN ISO 10545-2
compliant
stains
resistance
EN ISO 10545-14
class 5
colors resistance
to light
DIN 51094
no alteration
after testing
thermal shock
resistance
EN ISO 10545-9
resistant
TECHNICAL FEATURES GLAZED PORCELAIN STONEWARE
CONFORMING TO EUROPEAN STANDARDS EN 14411 ISO 13006 APP. G (Group BIA GL Eb ≤ 0,5%)
CARATTERISTICHE TECNICHE GRÈS PORCELLANATO SMALTATO
Conformi a Norme Europee EN 14411 ISO 13006 App. G (Gruppo BIa GL Eb ≤ 0,5%)
TECHNICAL FEATURES UNGLAZED PORCELAIN STONEWARE
CONFORMING TO EUROPEAN STANDARDS EN 14411 ISO 13006 APP. G (Group BIA UGL Eb ≤ 0,5%)
CARATTERISTICHE TECNICHE GRÈS PORCELLANATO NON SMALTATO
Conformi a Norme Europee EN 14411 ISO 13006 App. G (Gruppo BIa UGL Eb ≤ 0,5%)
valid for CLUSTER | FAMILIAR | JOINT
valid for MICROTILES | VICTORIAN
chemical
resistance
EN ISO 10545-13
from GLA to GLB
from GHA to GHB
GA
stains
resistance
EN ISO 10545-14
class 5
colors resistance
to light
DIN 51094
no alteration
after testing
water
absorption
EN ISO 10545-3
compliant
thermal shock
resistance
EN ISO 10545-9
resistant
frost
resistance
EN ISO 10545-12
resistant
friction coefficient
(slipperiness)
EN DIN 16165 annex B
ANSI A 137.1 (DCOF)
R10 matt
>0,42
breaking
strength
EN ISO 10545-4
compliant
thk ≥ 7,5 mm MIN 1300N
sizes
EN ISO 10545-2
compliant
chemical
resistance
EN ISO 10545-13
from ULA to ULB
from UHA to UHB
UA
stains
resistance
EN ISO 10545-14
class 5
colors resistance
to light
DIN 51094
no alteration
after testing
water
absorption
EN ISO 10545-3
compliant
thermal shock
resistance
EN ISO 10545-9
resistant
frost
resistance
EN ISO 10545-12
resistant
friction coefficient
(slipperiness)
EN DIN 16165 annex B
ANSI A 137.1 (DCOF)
R10 matt
>0,42
sizes
EN ISO 10545-2
compliant
modulus of
rupture
EN ISO 10545-4
compliant
I pezzi ceramici contenuti in queste scatole sono il risultato di un prodotto artigianale fabbricato a mano e si caratterizzano
per l’esclusività e le piccole variazioni di continuità, tramatura e calibro tra i vari pezzi. Eventuali leggeri difetti superficiali sono
da considerarsi parte integrante dell’artigianalità del prodotto. I toni presenti all’interno delle campionature sono da ritenersi
indicativi e possono variare leggermente tra una produzione e l’altra. Non si accetteranno reclami una volta posato il prodotto.
The exclusive ceramic products contained in these boxes are handmade and characterized by a slight variation in texture and
calibre among different pieces. Any slight surface defects are possible and are considered an inherent characteristic of this
handmade product. The shades of samples are indicative as they may vary slightly across production lots.
No claims will be accepted once the product has been laid.
NOTICE
Floor laying is not recommended for Microtiles Glaze and Mix Glaze families.
AVVERTENZA
Per Microtiles Glaze e Mix Glaze è sconsigliata la posa a pavimento.
abrasion
resistance
EN ISO 10545-6
compliant
abrasion
resistance
EN ISO 10545-7
3 - 5
