studimo – 13
12 – studimo
studimo
Sliding doors
Protruding
Sliding doors
Protruding
Stop positions
Sliding doors can run across the entire width of the rails.
Stop positions are located at each end of the rails.
Stop positions can also be installed between the ends if the
sliding doors should not run beyond certain positions.
Stop positions can be changed retroactively.
Cover panels with rails
Up to a length of 300.0 cm as one piece.
For longer lengths, panels can be joined.
Rails can either be placed in front of the panel or be
embedded in it.
Rails
Both upper and lower sliding doors run on rails.
If you are planning two sliding doors with one directly above
the other, both will run in a middle profile.
Rails are available at a continuous length of up to 550.0 cm.
Rails can be joined to achieve greater lengths.
PL-page 27
PL-page 8/9
PL-page 27
Sliding doors
Heights in modules: Widths in cm:
1 M
52.7 / 72.4 / 86.0 / 106.0 / 145.4
2 M
3 M
4 M
5 M
52.7 / 72.4 / 86.0
6 M
7 M
52.7 / 72.4
Real wood veneer finish on wood surfaces:
- cross real wood veneered up to 4 modules
- from 5 modules vertically real wood veneered
Sliding doors can be installed directly above one another.
If two sliding doors are planned for the same level they
cannot collide due to the built-in cushioning (collision
protection).
Each sliding door covers one half the relevant side.
Sliding doors can be used with inset fronts only if
flush-mounted folding handles are selected.
PL-page 24
Upright lateral frame profile in all matt lacquers
possible. Please specify.
Exterior rail
