collect plus – 23
22 – collect plus
collect plus
Side panels are a key design element for
non built-in wardrobes. Planning side
panels enables outer walls to be covered
across the full wardrobe depth.
The side panels permit a colour and
material mix distinct from the wardrobe
elements.
Side panels are available for design in
matt lacquer 0.7 / 1.3 / 2.0 or wood in
thicknesses of 1.4 / 2.1 cm.
Side panels made of wood feature a vertical
real wood veneer.
Side panels cannot be planned for sliding
doors.
Front version inline L on the first and/or last
hinged door with outward opening requires
side panels.
Side panels can also be used with room
dividers.
Dimensionally compensated side panels
(PL page 64) in depth 76 cm for on-
site adjustment, e.g. skirting boards.
Dimensionally compensated side panels
not available in 0.7 mm thickness
When combined with cover panels
(PL page 76), an all-round passe-partout
look can be achieved.
For adjustment on site:
Fitted panels
(PL page 64) flush with the outside in
lacquer or wood. Available in widths of 26
and 65.5 cm. Secured on site by screwing
to side of wardrobe.
Fitted panels available in all heights.
Front fitted panel with plinth
(PL page 16) Fitted along the front of the
wardrobe.
Available in widths of 26 cm and
65.5 cm and in all heights, in matt lacquer
and wood.
Front fitted panel setup without handle
(PL page 14).
Front fitted panel fineline on one side with
fineline profile (PL page 40).
Fitting aids included in delivery enable exact
application of the wall contour to the front
fitted panel.
Side panels
Fitted panels
Fitted panels
flush with the outside
PL page 64
Front fitted panels
flush with the front
PL page 14 for setup, PL page 40 for fineline
