Description
The Ekinex® multisensor with controller is a KNX S-mode device for independent
temperature control of a room or building area. The module includes 3
sensors: temperature, humidity percentage and air quality, expressed in terms
of TVOC (Total Volatile Organic Compounds) or CO2 equivalent. It can also
function as a controller for these three quantities, valid for a single zone to
be controlled. The front LEDs indicate the heating, cooling, dehumidification,
humidification and TVOC or CO2 threshold status. The push-button and the
programming LED are located on the front in the area below the button.
The device integrates a KNX bus communication module and is intended for mounting
onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus
and does not require any auxiliary power supply.
Main features
• Integrated temperature and relative humidity sensors
• VOC (Volatile Organic Compounds) sensor with output signal for CO2 equivalent
and TVOC
• Room thermostat function
• Threshold regulator function for relative humidity, TVOC and CO2
• Available an alarm signal on the CO2 level also useful to obtain 1 LEED certification
point
• Compatibility with Belimo actuators for the control of dampers in VAV boxes
and 6-way valves
• Plastic casing
• Connection to bus line with KNX terminal block
• Frontal programming pushbutton and LED
• Wall-mounting installation on round,square or rectangular wall box
• IP20 protection degree (installed)
• Weight 120 g (with mounting support)
Technical data
• 30 Vdc power supply by KNX bus
• Current consumption from bus < 13 mA
• Max. bus power < 390 mW
Delivery
Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.
Accessories
The following accessories are available to be ordered separately:
• 1 full front cover with 60 x 60 mm modularity
• rectangular frame Form or Flank version
• rectangular plate with 60 x 60 mm window
• a plastic adapter
• a metal support for installation onto round or square (fixing holes 60 mm apart)
or rectangular (fixing holes 83,5 mm apart) mounting box
Description
The Ekinex® multisensor with controller is a KNX S-mode device for independent
temperature control of a room or building area. The module includes 3
sensors: temperature, humidity percentage and air quality, expressed in terms
of TVOC (Total Volatile Organic Compounds) or CO2 equivalent. It can also
function as a controller for these three quantities, valid for a single zone to
be controlled. The front LEDs indicate the heating, cooling, dehumidification,
humidification and TVOC or CO2 threshold status. The push-button and the
programming LED are located on the front in the area below the button.
The device integrates a KNX bus communication module and is intended for mounting
onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus
and does not require any auxiliary power supply.
Main features
• Integrated temperature and relative humidity sensors
• VOC (Volatile Organic Compounds) sensor with output signal for CO2 equivalent
and TVOC
• Room thermostat function
• Threshold regulator function for relative humidity, TVOC and CO2
• Available an alarm signal on the CO2 level also useful to obtain 1 LEED certification
point
• Compatibility with Belimo actuators for the control of dampers in VAV boxes
and 6-way valves
• Plastic casing
• Connection to bus line with KNX terminal block
• Frontal programming pushbutton and LED
• Wall-mounting installation on round or square wall box
• IP20 protection degree (installed)
• Weight 90 g (with mounting support)
Technical data
• 30 Vdc power supply by KNX bus
• Current consumption from bus < 13 mA
• Max. bus power < 390 mW
Delivery
Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.
Accessories
The following accessories are available to be ordered separately:
• 1 full front cover with 60 x 60 mm modularity
• square and double frame Form or Flank version
• square, double and triple plate with 60 x 60 mm window
• a plastic adapter
• a metal support for installation onto round or square mounting box
(fixing holes 60 mm apart)
Dimensions [mm]
L
13
9
21
43
H
Confi guration and commissioning
By means of ETS5 software or later versions
Application program: APEKES3TP##.knxprod
(## = version, downloadable from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Mounting with frame: 81 x 77 (L x H)
Mounting without frame (‘NF): 80 x 80 (L x H)
Confi guration and commissioning
By means of ETS5 software or later versions
Application program: APEKES3TP##.knxprod
(## = version, downloadable from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
L
H
12
9
21
43
Mounting with frame: 122 x 77 (L x H)
Mounting without frame (‘NF): 120 x 80 (L x H)
Order information
Code
Mounting
EK-ES3-TP
with square and double frame Form or Flank
version, without frame (‘NF version)
Order information
Code
Mounting
EK-ES3-TP
with square and double frame Form or Flank
version, without frame (‘NF version)
TECHNICAL025EN
122
123
03
Introduction
17
Wall-mount devices
293
DIN-Rail mount modules
363
Visualisation
379
Audio Multiroom
427
IP Door Phone
445
Lift TV
457
Tools
461
Sales kit
466
Technical section
477
General terms of sale
481
General index
Multisensor with humidity,
TVOC and CO2 eq. regulator
for rectangular wall-box
WALL-MOUNT DEVICES
Multisensor with humidity,
TVOC and CO2 eq. regulator
WALL-MOUNT DEVICES
