Confi guration and commissioning
Accédo module for managing room access control, booking administration, and a
quick and easy interface for registering guests and creating RFID keys.
Accédo Key
HOSPITALITY SOLUTION
Description
EK-ACC-KEY-IP is a slim access control terminal that combines a door controller
and a card reader in a single device, offering significant cost savings for building
managers. It offers flexible access technologies, including PIN code, QR scanning
and RFID cards, all in one device.
Ekinex Accèdo Key has a built-in controller and a single LAN cable is all you need for
connection and power (PoE). In its simplest configuration, it can operate in stand-
alone mode, but it can also be integrated into a complete solution with Delego Server
as the manager of the entire access control system.
Technical data
• Power supply: PoE and/or 12 Vdc 1 A connector
• PoE: 802.3af (Class 0–12.95 W)
Interfaces
• Ethernet port (LAN): RJ45, adaptive 10/100Mbps
• Recommended cable: Cat-5e or higher
• Output power: 12V@ 600mA
• Relay output: 1 relay / Inputs: 2 inputs
• Wiegand: supported supportato
Main features
• RS485 port: for safety relay EK-SR1-VI
• Tamper alarm: supported/
• Audio: 8 / 0.5W
• Supported protocols: IPv4, HTTP, HTTPS, FTP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP
• Aluminium alloy chassis with tempered glass / IP65 and IK09 ratings
• Capacity of 20,000 cards and 100,000 event logs
• Multiple access methods: QR code, Bluetooth, PIN, RFID
• Flush and surface mounting.
• Front panel: tempered glass / Frame: black aluminium
• Operating temperature: -20 °C to +55 °C
• Storage temperature: -30 °C to +70 °C
• Operating relative humidity: 10% ~ 90% (non-condensing)
• Dimensions Accédo Key (W x H x D): 50 x 140 x 26.7 mm
• Dimensions flush-mounted box (W x H x D): 50 x 140 x 14 mm
• Supported frequencies for RFID card reader: 125 kHz and 13.56 MHz
• Keypad with capacitive touch technology
• Displays: backlit numbers, acoustic response to each touch of the keypad
• QR code reader with stand-alone operation only when connected
to the cloud with the Dico app; local (and remote) operation in combination
with Delègo server
• Flush mount installation (with optional flush mount box code
EK-ACC-KEY-IW) or wall mounting
Delivery
• Access control terminal (Accédo key)
• Wiring cover / Installation screws
• Rubber plugs for cable fixing
• Ethernet cable and connector / 8-pin flat cable
• Diode
Dimensions [mm]
14.80
26.70
50.00
140.00
Documentation
For more information see the technical documentation,
download from www.ekinex.com
RFID Card Reader
HOSPITALITY SOLUTION
COMING SOON
Description
The EK-TO2-TP access control device with RFID technology is used to detect presence
in hospitality environments. Equipped with two bistable relays, an input for potential-
free contacts and a front LED indicator (white). The device has an integrated KNX bus
communication module and is designed for flush-mounted installation in a wall box; it is
compatible with Ekinex Deep and Era mechanics, with a 60x60mm window; it is powered
by SELV voltage via the KNX bus and requires an auxiliary power supply of 12-24 Vac or
12/32 Vdc.
Technical data
• 30 Vdc power supply via KNX bus
• Auxiliary power supply 12-24 Vac or 12/32 Vdc
• Card reader with MIFARE 13.56 MHz RFID technology
Main features
• Backlit display with DND symbols (Do Not Disturb, Red LED),
• MUR (Make Up Room, GREEN LED), RFID (not backlit), RGB LED for general functions,
doorbell button with White LED
• Presence detection via bus and communication to supervisory system via KNX TP
(twisted pair) bus
• KNX Secure protocol
• Accommodation guest management based on reservation and period
check-in/check-out period; service user management based on time slot and pass-
partout
• Programmable output based on card validation or as actuator activated by KNX
telegrams. Delay on card withdrawal configurable for courtesy light management
• Two digital inputs available for connection of conventional push button (with
switching, dimming or roller shutter/awning function) or contact signalling contact
(e.g. window opening)
• Symbols DND (Do Not Disturb, Red LED), MUR (Make Up Room, GREEN LED), RFID
(not backlit), RGB LED for general functions, doorbell button with White LED
• Plastic housing
• Connection to bus line via KNX terminal
• Recessed wall mounting on round box
• Degree of protection IP20 (installed)
• Weight approx. 50 g (with mounting bracket
Delivery
The scope of delivery includes a terminal for connection to the bus line, a plastic
bracket for mounting on a round or square box (hole spacing 60 mm) and two pairs
of screws.
Accessories
• smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10
(customised with customer logo, on request)
• square frame Form or Flank version
• square plate with 60 x 60 mm window
• plastic adapter
Dimensions [mm]
8.74
70.00
70.00
35.14
59.60
26.50
Confi guration and commissioning
Accédo module for managing room access control, booking administration, and a
quick and easy interface for registering guests and creating RFID keys.
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Mounting
Package
EK-ACC-KEY-IP
Flush and surface mounting
1 pcs.
Order information
Codice
Mounting
Colore
Package
EK-TO2-TP-B
placca con finestra da 60x60 mm
(in plastica, alluminio o fenix NTM®)
Black
1 pcs.
cornice opzionale versione Form o Flank
(in plastica o alluminio)
EK-TO2-TP-W
placca con finestra da 60x60 mm
(in plastica, alluminio o fenix NTM®)
White
cornice opzionale versione Form o Flank
(in plastica o alluminio)
TECHNICAL025EN
150
151
03
Introduction
17
Wall-mount devices
293
DIN-Rail mount modules
363
Visualisation
379
Audio Multiroom
427
IP Door Phone
445
Lift TV
457
Tools
461
Sales kit
466
Technical section
477
General terms of sale
481
General index