[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"catalog-terratinta-group-light-6mm":3,"$f54gFciXR1FznWJVNft3TqcXl0B8GYbPbga8lnvghe78":221},{"id":4,"title":5,"slug":6,"image":7,"source":8,"brand_name":9,"brand":10,"brand_slug":11,"file_size":12,"pages":13,"pages_count":216,"matched_pages":217,"match_count":218,"two_pages":219,"show_text":220},21899,"Group Light 6mm","terratinta-group-light-6mm","\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.1.png","http:\u002F\u002F127.0.0.1:8000\u002Fprivate\u002Ffiles\u002Fc7\u002F339d814b420c6fdf4ec47c5e899748-28dfc4fa7e.pdf","Terratinta",2445,"terratinta","11.8 MB",[14,17,21,25,29,33,37,41,45,49,53,57,61,65,69,73,77,81,85,89,93,97,101,105,109,113,117,121,125,129,133,137,141,145,149,153,157,161,165,169,173,177,181,185,189,193,197,201,205,209,213],{"image":7,"text":15,"number":16},"1\n",1,{"image":18,"text":19,"number":20},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.2.png","2\nLight is the new concept of Terratinta Group \nthat identifies the 6mm thickness.\nA capsule collection that contains the world \nof Terratinta Group: Kos, Betontech, Vicentina \nCenere, Biancone Beige, Marmo Carrara and \nMarmo Apuano,  Arte Marmo and Ceppo\npresent themselves with a new range of slabs \nthat combines thin thickness with large size.\n06_KOS\n22_BETONTECH\n32_VICENTINA CENERE\n38_MICROCOSMI\n52_MARMO APUANO\n58_MARMO CARRARA\n64_ARTE MARMO\n70 _BIANCONE BEIGE\n76 _CEPPO\nLight è il nuovo concept di Terratinta Group\nche identifica lo spessore 6mm. \nUna capsule collection che contiene il mondo \nTerratinta Group: Kos, Betontech, Vicentina \nCenere, Biancone Beige, Marmo Carrara e \nMarmo Apuano, Arte Marmo e Ceppo si \npresentano con una nuova gamma di lastre\nche uniscono spessore sottile e grande formato.\n",2,{"image":22,"text":23,"number":24},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.3.png","4\n5\nWhite\nGrey\nBrun\nIrish Green\nMoln\nVerde Alpi\nAntracit\nVit\nCalacatta \nMacchia Antica\n120x260cm | 120x120cm | 60x120cm \n48”x102” | 48”x48” | 24”x48”\n120x280cm  \n48”x111” \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\n120x280cm\n48”x111”\nSand\nCalacatta Green\nKOS matt\nMICROCOSMI \nmatt | polished\nBETONTECH matt\nCenere \nVICENTINA matt | ultra matt\n120x260cm | 120x120cm \n48”x102” | 48”x48”\nGrey\nARTE MARMO \npolished | silk\n120x260cm | 120x120cm \n48”x102” | 48”x48”\nGrey\nCEPPO\nmatt\n120x280cm\n48”x111”\nMarmo Apuano \nMARMO APUANO \nhoned\n120x280cm\n48”x111”\nBiancone\nBIANCONE \nmatt\n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nMarmo Carrara\nMARMO CARRARA \npolished | silk\n",3,{"image":26,"text":27,"number":28},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.4.png","6\n7\nVit\nSand\nBrun\nMoln\nAntracit\nKos\nWith Kos collection our aim is to reinforce \nour idea of North European distinguishing \ndesign, made of simplicity, timeless beauty, \naesthetics, never giving up on quality and \nlatest technologies available.\nFor this reason, the project born in 10mm \nand 20mm is now expanded with 6mm. \nA complete proposal that ranges from the \n10x10cm size to the 120x260cm slab, all \nrectified and modular.\nKos\nCon la collezione Kos il nostro obiettivo è \nstato rafforzare il nostro concetto di design \nNord Europeo fatto di semplicità, bellezza \nsenza tempo, estetica, che non rinuncia \nmai alla qualità e alle ultime tecnologie \ndisponibili.\nPer questo il progetto, nato in 10mm e \n20mm, ora si amplia con il 6mm. \nUna proposta completa che spazia dal \nformato 10x10cm fino alla lastra 120x260cm, \ntutto rettificato e modulare.\n    \n    6mm\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS\n120x260cm Kos Moln          matt_floor\n",4,{"image":30,"text":31,"number":32},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.5.png","KOS\n120x120cm Kos Sand          matt_floor\n120x120cm Grained Green Copper TERRATINTA CERAMICHE matt_wall\n20x120cm Libeccio Naturale CERAMICA MAGICA matt_wall\n",5,{"image":34,"text":35,"number":36},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.6.png","KOS\n120x260cm Kos Vit          matt_floor\n",6,{"image":38,"text":39,"number":40},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.7.png","12\n13\nKOS Vit 120x260cm | 48”x102” matt\nV2\nMODERATE\nVit\nKOS\n    \n    6mm\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS Vit 120x120cm | 48”x48” matt\nKOS Vit graphic development - sviluppo grafico\nKOS Vit \n60x120cm | 24”x48” matt\n",7,{"image":42,"text":43,"number":44},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.8.png","14\n15\nV2\nMODERATE\nKOS\n    \n    6mm\nKOS Sand graphic development - sviluppo grafico\nSand\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS Sand 120x260cm | 48”x102” matt\nKOS Sand 120x120cm | 48”x48” matt\nKOS Sand \n60x120cm | 24”x48” matt\n",8,{"image":46,"text":47,"number":48},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.9.png","16\n17\nV2\nMODERATE\nKOS\n    \n    6mm\nKOS Brun graphic development - sviluppo grafico\nBrun\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS Brun 120x260cm | 48”x102” matt\nKOS Brun 120x120cm | 48”x48” matt\nKOS Brun \n60x120cm | 24”x48” matt\n",9,{"image":50,"text":51,"number":52},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.10.png","18\n19\nV2\nMODERATE\nKOS\n    \n    6mm\nKOS Moln graphic development - sviluppo grafico\nMoln\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS Moln 120x260cm | 48”x102” matt\nKOS Moln 120x120cm | 48”x48” matt\nKOS Moln \n60x120cm | 24”x48” matt\n",10,{"image":54,"text":55,"number":56},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.11.png","20\n21\nV2\nMODERATE\nKOS\n    \n    6mm\nKOS Antracit graphic development - sviluppo grafico\nAntracit\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nKOS Antracit 120x260cm | 48”x102” matt\nKOS Antracit 120x120cm | 48”x48” matt\nKOS Antracit \n60x120cm | 24”x48” matt\n",11,{"image":58,"text":59,"number":60},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.12.png","22\nBetontech \nSince 2011 the pivotal series of Terratinta, \nwhich develops its two main colors also in \nthe 6mm thickness and in its larger sizes. \nBetontech is the base ground of The Four \nShades Concept, a pillar for the concrete \neffect of our Company.\nNow as then, a series designed for those \nwho believe that simplicity is a value \nwithout price.\nBetontech \nDal 2011 la serie cardine di Terratinta, che si \nevolve nei suoi due colori principali anche \nnello spessore 6mm e nei suoi più grandi \nformati.\nParte fondante del Four Shades Concept, un \npilastro per l’effetto cemento della nostra \nazienda. \nOggi come allora, una serie disegnata per \ncoloro che credono che la semplicità sia un \nvalore senza prezzo.\nBETONTECH\n    \n    6mm\n120x260cm Betontech White          matt_wall\nWhite\nGrey\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\n",12,{"image":62,"text":63,"number":64},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.13.png","24\n25\nV2\nMODERATE\nBETONTECH\n    \n    6mm\nBETONTECH White graphic development - sviluppo grafico\nWhite\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nBETONTECH White 120x260cm | 48”x102” matt\nBETONTECH White 120x120cm | 48”x48” matt\nBETONTECH White \n60x120cm | 24”x48” matt\n",13,{"image":66,"text":67,"number":68},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.14.png","26\n27\nV2\nMODERATE\nBETONTECH\n    \n    6mm\nBETONTECH Grey graphic development - sviluppo grafico\nGrey\nmatt \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\nBETONTECH Grey 120x260cm | 48”x102” matt\nBETONTECH Grey 120x120cm | 48”x48” matt\nBETONTECH Grey \n60x120cm | 24”x48” matt\n",14,{"image":70,"text":71,"number":72},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.15.png","29\nBETONTECH\n120x260cm Betontech Grey           matt_wall\n120x260cm Betontech White          matt_floor\n",15,{"image":74,"text":75,"number":76},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.16.png","30\n31\nBETONTECH\n120x260cm Betontech White          matt_wall\n31,6x31,6cm Hexa Rusty Red TERRATINTA CERAMICHE mix_wall\n60x120cm Grained Zinc TERRATINTA CERAMICHE matt_floor\n",16,{"image":78,"text":79,"number":80},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.17.png","33\n32\nVicentina Cenere \nLe qualità della Vicentina Cenere, le sue \nlievi sfumature che muovono la superficie \noffrendo impercettibili stacchi cromatici \nall’interno della stessa nuance, si riversano \nsul grande formato. Con le lastre in spessore \n6 mm e di dimensione 120x280, Vicentina \nCenere offre resistenza, leggerezza, \nflessibilità, duttilità. Una grande lastra che \npermette di ridurre la presenza di fughe e \ninterruzioni nei progetti, versatile per ogni \nesigenza. \nVicentina Cenere \nThe qualities of Vicentina Cenere, its slight \nnuances that move the surface offering \nelusive chromatic gaps within the same \nnuance, are now poured on large size. \nWith the 6 mm thick and 120x280 size \nslabs, Vicentina Cenere offers strength, \nlightness, flexibility and ductility. A large \nslab that reduces the presence of joints and \ninterruptions in projects, versatile for every \nneed.\nVICENTINA CENERE\n    \n    6mm\n120x280cm Vicentina Cenere          matt_floor\nCenere\nmatt | ultra matt  \n120x280cm \n48”x111” \n",17,{"image":82,"text":83,"number":84},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.18.png","34\n35\nV2\nMODERATE\nVICENTINA CENERE 120x280cm | 48”x111” matt \nVICENTINA CENERE\n    \n    6mm\nVICENTINA CENERE graphic development - sviluppo grafico\nCenere\nmatt | ultra matt \n120x280cm \n48”x111” \n",18,{"image":86,"text":87,"number":88},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.19.png","36\n37\nVICENTINA CENERE\n120x280cm Vicentina Cenere          matt_wall\n120x280cm Marmo Apuano          honed_wall\n60x120cm Vicentina Cenere TERRATINTA CERAMICHE matt_floor\n",19,{"image":90,"text":91,"number":92},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.20.png","38\n39\nCalacatta Macchia \nAntica\nCalacatta Green\nIrish Green\nVerde Alpi\nMicrocosmi\nA refined selection of rare and original \nmarbles to combine the aesthetic \nperfection of natural elements with thin \nthickness and the 120x280cm large size. \nMaterials inspired by the most prestigious \nmarbles for a timeless collection that blends \nharmoniously with contemporary design. \nMicrocosmi\nUna raffinata selezione di marmi rari e \noriginali per coniugare la perfezione \nestetica degli elementi naturali con lo \nspessore sottile e il grande formato \n120x280cm. Materia ispirata ai marmi più \nprestigiosi per una collezione senza tempo \nche si sposa armoniosamente con il design \ncontemporaneo. \n    \n    6mm\nmatt | polished \n120x280cm \n48”x111” \nMICROCOSMI\n120x280cm Microcosmi Calacatta Green          matt_wall\n",20,{"image":94,"text":95,"number":96},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.21.png","40\n41\n120x280cm Microcosmi Calacatta Macchia Antica           polished_wall\n60x120cm Microcosmi Calacatta Macchia Antica Ceramica Magica polished_floor\nMICROCOSMI\n6x25cm Materici 07 Visone Sartoria glossy_wall\n",21,{"image":98,"text":99,"number":100},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.22.png","42\n120x280cm Microcosmi Irish Green           matt_wall\nMICROCOSMI\n120x280cm Microcosmi Irish Green           matt_wall\n6x25cm Materici 01 Latte Sartoria glossy_wall\n80x80cm Microcosmi Granito Ceramica Magica matt_floor\n",22,{"image":102,"text":103,"number":104},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.23.png","44\n45\n    \n    6mm\nMICROCOSMI\nV2\nMODERATE\nCALACATTA MACCHIA ANTICA 120x280cm | 48”x111” \nCalacatta Macchia Antica\nmatt | polished  \n120x280cm \n48”x111” \nCALACATTA MACCHIA ANTICA graphic development - sviluppo grafico\n",23,{"image":106,"text":107,"number":108},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.24.png","46\n47\nV2\nMODERATE\nCALACATTA GREEN 120x280cm | 48”x111” \nCalacatta Green\nmatt | polished  \n120x280cm \n48”x111” \nCALACATTA GREEN graphic development - sviluppo grafico\n    \n    6mm\nMICROCOSMI\n    \n    6mm\n",24,{"image":110,"text":111,"number":112},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.25.png","48\n49\nV2\nMODERATE\nIRISH GREEN 120x280cm | 48”x111” \nIrish Green\nmatt | polished  \n120x280cm \n48”x111” \nIRISH GREEN graphic development - sviluppo grafico\n    \n    6mm\nMICROCOSMI\n    \n    6mm\n",25,{"image":114,"text":115,"number":116},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.26.png","50\n51\nV2\nMODERATE\nVERDE ALPI 120x280cm | 48”x111” \nVerde Alpi\nmatt | polished  \n120x280cm \n48”x111” \nVERDE ALPI graphic development - sviluppo grafico\n    \n    6mm\nMICROCOSMI\n    \n    6mm\n",26,{"image":118,"text":119,"number":120},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.27.png","52\n53\nMarmo Apuano \nCeramica Magica’s Marmo Apuano revisits \nthe expressive potential of marble in the \nlarge size 120x280cm, to create strongly \nscenographic environments, elegant and \nclassic but also multi-faceted thanks to the \nthickness of only 6 mm which makes this \nmaterial a prized garment for furnishings or \nbathroom accessories. Marmo Apuano slabs \nare a synthesis of research, technique and \ntradition revisited, with the strength and \nreliability that are characteristic features of \nthe best porcelain stoneware, in a rich choice \nof shades of color and realistic veining.\nMarmo Apuano \nIl Marmo Apuano di Ceramica Magica \nrivisita nel grande formato 120x280cm \nle potenzialità espressive del marmo, \nper dare vita ad ambienti scenografici \ndi forte impatto, eleganti e classici ma \nanche poliedrici. Lo spessore di soli 6 \nmm rende questo materiale una veste \npregiata per arredi o complementi bagno. \nLe lastre di Marmo Apuano sono una \nsintesi di ricerca, tecnica e tradizione \nrivisitata, con la resistenza e l’affidabilità \nche sono caratteristiche del migliore gres \nporcellanato, in un ricco assortimento di \nsfumature di colore e venature realistiche.\nMARMO APUANO\n    \n    6mm\nMarmo Apuano\nhoned   \n120x280cm \n48”x111” \n120x280cm Marmo Apuano          honed_wall\n20x120cm Libeccio Moka Ceramica Magica matt_floor\n",27,{"image":122,"text":123,"number":124},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.28.png","54\n55\nV2\nMODERATE\nMARMO APUANO 120x280cm | 48”x111” honed\nMARMO APUANO\n    \n    6mm\nMarmo Apuano\nhoned  \n120x280cm \n48”x111” \nMARMO APUANO graphic development - sviluppo grafico\n",28,{"image":126,"text":127,"number":128},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.29.png","56\n57\nMARMO APUANO\n120x280cm Marmo Apuano           honed_desk\n120x280cm Vicentina Cenere           matt_wall\n",29,{"image":130,"text":131,"number":132},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.30.png","58\n59\nMarmo Carrara \nA novelty that enriches the most classic \nTerratinta Group collections. A timeless \nmarble, suitable for any use, elegant and \nwith its recognized personality enhanced \nby two finishes: the classic gloss, called \n“polished”, and the most innovative “silk” \nfinish, a matt gloss that brings back the \nnature of marble.\nMarmo Carrara \nUna novità che arricchisce le collezioni \npiù classiche Terratinta Group. Un marmo \nsenza tempo, adatto per qualsiasi utilizzo, \nelegante e con una sua riconosciuta \npersonalità valorizzata da due finiture: il \nclassico lucido, denominato “polished”, e la \npiù innovativa finitura “silk”, un lucido matt \nche riporta alla natura del marmo.\nMARMO CARRARA\n    \n    6mm\nMarmo Carrara\npolished | silk   \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\n120x260cm Marmo Carrara          polished_floor\n",30,{"image":134,"text":135,"number":136},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.31.png","60\n61\nMARMO CARRARA\n120x260cm Marmo Carrara          silk_wall\n31,6x31,6cm Hexa Deep Navy Terratinta Ceramiche matt_wall\n20x120 - 30x120cm Libeccio Tortora Ceramica Magica matt_floor\n",31,{"image":138,"text":139,"number":140},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.32.png","62\n63\nMARMO CARRARA 120x260cm | 48”x102” \nV2\nMODERATE\nMARMO CARRARA\n    \n    6mm\nMarmo Carrara\npolished | silk \n120x260cm | 120x120cm | 60x120cm \n48”x102” | 48”x48” | 24”x48”\nMARMO CARRARA 120x120cm | 48”x48”\nMARMO CARRARA \n60x120cm | 24”x48”\nMARMO CARRARA graphic development - sviluppo grafico\n",32,{"image":142,"text":143,"number":144},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.33.png","65\nArte Marmo\nThe thin thickness revisits also the classics \nlike Arte Marmo by Ceramica Magica. \nEternal and versatile surfaces that are \nfurther perfected with the addition of the \n6mm version. A collection born with the \ndesire to refresh the classic style that today \nis enriched with new relevant sizes.\nArte Marmo\nLo spessore sottile rivisita anche i \nclassici come Arte Marmo di Ceramica \nMagica. Superfici eterne e versatili che si \nperfezionano ulteriormente con l’aggiunta \ndella versione in 6mm. Una collezione nata \ncon la volontà di rinfrescare lo stile classico \nche oggi si arricchisce di possibilità con \nnuovi importanti formati.\nARTE MARMO\n    \n    6mm\nGrey\npolished | silk   \n120x260cm | 120x120cm | 60x120cm\n48”x102” | 48”x48” | 24”x48”\n120x260cm Arte Marmo Grey          polished_floor\n64\n",33,{"image":146,"text":147,"number":148},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.34.png","66\n67\nARTE MARMO Grey 120x260cm | 48”x102”\nV2\nMODERATE\nARTE MARMO\n    \n    6mm\nGrey\npolished | silk \n120x260cm | 120x120cm  \n48”x102” | 48”x48” \nARTE MARMO Grey 120x120cm | 48”x48”\nARTE MARMO Grey graphic development - sviluppo grafico\n",34,{"image":150,"text":151,"number":152},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.35.png","68\n69\nARTE MARMO\n20x120 - 30x120cm Libeccio Moka Ceramica Magica matt_floor\n120x260cm Arte Marmo Grey          silk_wall\n31,6x31,6cm Hexa Ocean Wave Terratinta Ceramiche matt_wall\n",35,{"image":154,"text":155,"number":156},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.36.png","70\n71\nBiancone Beige \nStone is the main material of the Apulian \nterritory. An area in which the presence of \nman is almost merged with its absence, \nwrapped in silence you can see how man \nhas used stone over time to build farms and \nfarmhouses but also for local buildings and \nworks of art such as Trani Cathedral. The \nabsolute protagonist is Biancone, a limestone \nrock characterised by the white colouring \ntypical of the area, used both for craftwork \nsuch as interior and exterior cladding, \nsculptures, staircases and swimming pools, \nand also for industrial constructions such \nas pavements, squares and walls, so much \nso that it has become a highly prized iconic \nmaterial known all over the world.\nBiancone Beige \nLa pietra è il materiale principe del territorio \npugliese. Un’area in cui la presenza umana \nquasi si confonde con la sua assenza, avvolti \nnel silenzio si nota come l’uomo si sia \nservito nel tempo della pietra per edificare \nmasserie, case coloniche ma anche per \ncostruzioni ed opere d’arte locali come la \nCattedrale di Trani. Protagonista assoluto \nè il Biancone, roccia calcarea caratterizzata \ndalla colorazione bianca tipica della zona \nutilizzata sia per realizzazioni artigianali \ncome rivestimenti interni, esterni, sculture, \nscale e piscine, ed anche per realizzazioni \nindustriali come lavorazioni stradali tra \ncui marciapiedi, piazze, muretti, tanto \nda divenire un materiale iconico molto \npregiato e conosciuto in tutto il mondo.\nBIANCONE BEIGE\n    \n    6mm\nBeige\nmatt   \n120x280cm \n48”x111” \n120x280cm Biancone Beige          matt_shower\n30x60cm Biancone Beige Cava Ceramica Magica matt_wall\n90x90cm Biancone Beige Ceramica Magica matt_floor\n",36,{"image":158,"text":159,"number":160},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.37.png","72\n73\nV2\nMODERATE\nBIANCONE BEIGE 120x280cm | 48”x111” matt\nBIANCONE BEIGE\n    \n    6mm\nBiancone Beige\nmatt  \n120x280cm \n48”x111” \nBIANCONE BEIGE graphic development - sviluppo grafico\n",37,{"image":162,"text":163,"number":164},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.38.png","74\n75\nBIANCONE BEIGE\n120x280cm Biancone Beige           matt_wall\n20x20cm Biancone Beige Ceramica Magica matt_floor\n20x20cm Mar Casino di Monsignore Sartoria matt_floor\n",38,{"image":166,"text":167,"number":168},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.39.png","77\nCeppo \nThe aesthetics of ceppo, a stone \ncharacterized by pebbles included in \nthe surface, develops the large size with \nLight6mm, highlighting the rich surface with \ncold tones. A new resource for the world \nof architecture, thanks to its modern and \ntraditional character.\nCeppo\nL’estetica del ceppo, roccia caratterizzata \nda ciottoli inclusi nella superficie, si sviluppa \ncon Light nel grande formato, mettendo \nin risalto la ricca superficie dalle tonalità \nfredde. Una nuova risorsa per il mondo \ndell’architettura, grazie al suo carattere \nal tempo stesso moderno e tradizionale.\nCEPPO\n    \n    6mm\nGrey\nmatt   \n120x260cm | 120x120cm \n48”x102” | 48”x48” \n120x260cm Ceppo Grey         matt_floor\n76\n",39,{"image":170,"text":171,"number":172},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.40.png","78\nCEPPO Grey 120x260cm | 48”x102” matt\nV2\nMODERATE\nCEPPO\n    \n    6mm\nGrey\nmatt \n120x260cm | 120x120cm  \n48”x102” | 48”x48” \n79\nCEPPO Grey 120x120cm | 48”x48” matt\nCEPPO Grey graphic development - sviluppo grafico\n",40,{"image":174,"text":175,"number":176},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.41.png","CEPPO\n120x260cm Ceppo Grey          matt_floor\n",41,{"image":178,"text":179,"number":180},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.42.png","CEPPO\n120x260cm Ceppo Grey           matt_wall\n31,6x31,6cm Hexa Yellow Corn Terratinta Ceramiche matt_wall\n60x120cm Oppdal Kull Terratinta Ceramiche matt_floor\n",42,{"image":182,"text":183,"number":184},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.43.png","84\nPACKAGING | IMBALLI\nBETONTECH\nPCS\u002FBOX\nSQ.MT.\nKG\nBOXES\nSQ.MT.\nKG\n60x120 matt\n3\n2,16\n30,46\n16\n34,56\n507\n120x120 matt\n2\n2,88\n40,61\n25\n72,00\n1.035\n120x260 matt\n1\n3,12\n43,99\n20\n62,40\n900\nKOS\nPCS\u002FBOX\nSQ.MT.\nKG\nBOXES\nSQ.MT.\nKG\n60x120 matt\n3\n2,16\n30,46\n16\n34,56\n507\n120x120 matt\n2\n2,88\n40,61\n25\n72,00\n1.035\n85\nVICENTINA Cenere\nPCS\u002FCRATE\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. CRATE\nKG\u002F CRATE\n120x280 \nmatt | ultra matt\n44\n3,36\n48,65\n147,84\n2.241\nPCS\u002FA-FRAME\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. \nA-FRAME\nKG\u002F A-FRAME\nzinc plate\n44\n3,36\n48,65\n147,84\n2.241\nMARMO APUANO\nPCS\u002FCRATE\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. CRATE\nKG\u002F CRATE\n120x280 honed\n20\n3,36\n48,65\n67,20\n1.033\nPCS\u002FA-FRAME\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. \nA-FRAME\nKG\u002F A-FRAME\nzinc plate\n44\n3,36\n48,65\n147,84\n2.241\nMARMO CARRARA\nPCS\u002FBOX\nSQ.MT.\nKG\nBOXES\nSQ.MT.\nKG\n60x120 silk\n3\n2,16\n30,46\n16\n34,56\n507\n60x120 polished\n120x120 silk\n2\n2,88\n40,61\n25\n72,00\n1.035\n120x120 polished\n120x260 silk\n1\n3,12\n43,99\n20\n62,40\n900\n120x260 polished\nARTE MARMO Grey\nPCS\u002FBOX\nSQ.MT.\nKG\nBOXES\nSQ.MT.\nKG\n120x120 silk\n2\n2,88\n40,61\n25\n72,00\n1.035\n120x120 polished\n120x260 silk\n1\n3,12\n43,99\n20\n62,40\n900\n120x260 polished\nPCS\u002FCRATE\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. CRATE\nKG\u002FCRATE\n120x280 matt\n20\n3,36\n50,00\n67,20\n1.060\nPCS\u002FA-FRAME\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. \nA-FRAME\nKG\u002F A-FRAME\nzinc plate\n36\n3,36\n50,00\n120,96\n1.900\n",43,{"image":186,"text":187,"number":188},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.44.png","86\n87\n86\nCEPPO\nPCS\u002FBOX\nSQ.MT.\nKG\nBOXES\nSQ.MT.\nKG\n120x120 matt\n2\n2,88\n40,61\n25\n72,00\n1.035\n120x260 matt\n1\n3,12\n43,99\n20\n62,40\n900\n87\nPACKAGING | IMBALLI\nBIANCONE Beige\nPCS\u002FCRATE\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. CRATE\nKG\u002F CRATE\n120x280 matt\n20\n3,36\n48,65\n67,20\n1.033\nPCS\u002FA-FRAME\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. \nA-FRAME\nKG\u002F A-FRAME\nzinc plate\n44\n3,36\n48,65\n147,84\n2.241\nMICROCOSMI\nPCS\u002FCRATE\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. CRATE\nKG\u002F CRATE\n120x280 \nmatt | polished\n20\n3,36\n48,65\n67,20\n1.033\nPCS\u002FA-FRAME\nSQ.MT. SLAB\nKG\u002FSLAB\nSQ.MT. \nA-FRAME\nKG\u002F A-FRAME\nzinc plate\n44\n3,36\n48,65\n147,84\n2.241\n",44,{"image":190,"text":191,"number":192},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.45.png","88\n89\nCARATTERISTICHE TECNICHE GRÈS PORCELLANATO NON SMALTATO Conformi a Norme Europee EN 14411 ISO 13006 App. G (Gruppo BIa UGL Eb ≤ 0,5%)\nTECHNISCHE EIGENSCHAFTEN UNGLASIERTES FEINSTEINZEUG Gemäß den Europäischen Normen EN 14411 ISO 13006 App. G (Gruppe BIa UGL Eb ≤ 0,5%)\nCARACTERISTIQUES TECHNIQUES GRÈS CÉRAME FIN NON ÉMAILLÉ Conformes aux Normes Européennes EN 14411 ISO 13006 App. G (Groupe BIa UGL Eb ≤ 0,5%)\nTECHNICAL FEATURES UNGLAZED PORCELAIN STONEWARE \nCONFORMING TO EUROPEAN STANDARDS EN 14411 ISO 13006 APP. G (GROUP BIA UGL EB ≤ 0,5%)\n* It’s advisable to refer Contract Division for all necessary guidelines to a correct use.\n   Si raccomanda di consultare Contract Division per le indicazioni necessarie al corretto utilizzo.\n   Zur korrekten Anwendung wird empfohlen unsere Contract Division zu kontaktieren.\n   Merci de consulter notre Contract Division pour les indications à un usage correct.\nsizes\nwater\nabsorption\nbreaking\nstrength\nabrasion\nresistance\nthermal expansion \ncoefficient\nthermal shock\nresistance\nfrost \nresistance\nchemicals\nresistance\nstains\nresistance\nfriction \ncoefficient \nEN ISO 10545-2\nEN ISO 10545-3\nEN ISO 10545-4\nEN ISO 10545-6\nEN ISO 10545-8\nEN ISO 10545-9\nEN ISO 10545-12\nEN ISO 10545-13\nEN ISO 10545-14\nDIN 51130\ncompliant\n≤9 MK-1\ncompliant\ncompliant\n\u003C175mm³\nresistant\nresistant\nfrom ULA to ULB\nfrom UHA to UHB\nUA\nclass 5\ncolors \nresistance to light\nDIN 51094\nno alteration\nafter testing\nANSI A 137.1 (DCOF)\nTECHNICAL FEATURES | CARATTERISTICHE TECNICHE\nR10  matt\nR11 ultramatt VICENTINA\n> 0,42\nBETONTECH - BIANCONE - CEPPO - KOS - MARMO Apuano - MICROCOSMI \nVICENTINA\nsizes\nwater\nabsorption\nbreaking\nstrength\nabrasion\nresistance\nEN ISO 10545-2\nEN ISO 10545-3\nEN ISO 10545-4\nEN ISO 10545-7\ncompliant\ncompliant\ncompliant\nfrom 4 to 5\nthermal expansion \ncoefficient\nthermal shock\nresistance\nfrost \nresistance\nchemicals\nresistance\nEN ISO 10545-8\nEN ISO 10545-9\nEN ISO 10545-12\nEN ISO 10545-13\n≤9 MK-1\nresistant\nresistant\nresistant\nfrom GLA to GLB\nfrom GHA to GHB\nGA\nstains\nresistance\nglaze crazing \nresistance\nEN ISO 10545-14\nEN ISO 10545-11\nclass 5\nTECHNICAL FEATURES | CARATTERISTICHE TECNICHE\nCARATTERISTICHE TECNICHE GRÈS PORCELLANATO SMALTATO Conformi a Norme Europee EN 14411 ISO 13006 App. G (Gruppo BIa GL con Eb ≤ 0,5%)\nTECHNISCHE EIGENSCHAFTEN GLASIERTES FEINSTEINZEUG Gemäß den Europäischen Normen EN 14411 ISO 13006 App. G (Gruppo BIa GL con Eb ≤ 0,5%)\nCARACTERISTIQUES TECHNIQUES GRÈS CÉRAME ÉMAILLÉ Conformes aux Normes Européennes EN 14411 ISO 13006 App. G (Gruppo BIa GL con Eb ≤ 0,5%)\nTECHNICAL FEATURES GLAZED PORCELAIN STONEWARE \nCONFORMING TO EUROPEAN STANDARDS EN 14411 ISO 13006 APP. G (GRUPPO BIA GL CON EB ≤ 0,5%)\nARTE MARMO Grey - MARMO Carrara - MICROCOSMI\n",45,{"image":194,"text":195,"number":196},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.46.png","90\n91\n1_Packaging \n    Sistemi di imballaggio\n2_Moving packages \n    Movimentazione degli imballi\n3_Moving large tiles on site \n    Movimentazione delle lastre in cantiere\n4_Working on large tiles \n    Lavorazioni sulle lastre\n5_Preparing the surface and applying adhesive\n    Preparazione supporto e stesura collante\n6_Installation\n    Posa\n7_Grouting\n    Stuccatura\n8_Cleaning\n    Pulizia\n9_General recommendations\n    Raccomandazioni generali\nSLABS TECHNICAL INFO\n77 _ENGLISH\n80 _ITALIANO\nEN\n1_PACKAGING\n \nSpecial packaging has been developed to store and transport large tiles safely. Large tiles, whether all the same size or in different sizes, \nare loaded into crates. All packages are dispatched full or according to individual order requests.\nIT IS RECOMMENDED TO MOVE THE CRATES ONE AT A TIME.\nCrate for 120x280cm\nCm 291,6 x 144,6 h 34,4 • Kg per tile 48,3  • tile per crate 20 • Sqm per crate 67,12 • Kg per full crate 1056 • Stockability max 10 pallets in \nwarehouse\nCrate for 120x260cm\nCm 275 x 136 h 28 • Kg per tile 44  • tile per crate 20 • Sqm per crate 62,40 • Kg per full crate 880 • Stockability max 10 pallets in \nwarehouse\nCrate for 120x120cm\nCm 130 x 130 x h 58 • Kg per tile 20,30  • tile per crate 50  • Sqm per crate 72 • Kg per full crate 1015 • Stockability max 4 pallets in \nwarehouse\n \nCrate for 60x120cm\nCm 129 x 69 x h 58 • Kg per tile 10,15  • tile per crate 48  • Sqm per crate 35,56 • Kg per full crate 522 • Stockability max 4 pallets in \nwarehouse\n2_MOVING PACKAGES \nLong side \nThis is the best option. Use forks at least 1.4 m long, set to the width that provides the best possible support for the package. \nShort side\nUse forks at least 2.1 m long, set to the width that provides the best possible support for the package.\nLOADING TRUCKS AND CONTAINERS\nTo load packages into a container, you can either use a fork lift or load from the ground using ramps of suitable height. \nUse straps, ties and airbags to keep the material secure during transport. When loading, always make sure that weight is distributed \nevenly to avoid displacement during transport. Loading calculations must always take account of transport weight limits.\nARRANGEMENT FOR LOADING ON CONTAINERS\nSIZE 120x280cm\nContainer 20’: 10 crates \nContainer 40’: 20 crates - Pay attention to maximum gross weight.\nSIZE 120x260cm\nContainer 20’: 10 crates \nContainer 40’: 20 crates - Pay attention to maximum gross weight.\nSIZE 120x120cm\nContainer 20’: 12 crates\nContainer 40’: 27 crates - Pay attention to maximum gross weight.\nSIZE 60x120cm\nContainer 20’: 24 crates \nContainer 40’: 54 crates - Pay attention to maximum gross weight.\n3_MOVING LARGE TILES ON SITE\nON-SITE EQUIPMENT\nIt is important to use suitable equipment to move large tiles on site.\nSuction cups \nUse vacuum pump suction cups on non-smooth or textured surfaces to ensure a firm grip during manual movement (120x120cm). \nUse non-marking rubber suction cups on light coloured surfaces.\nSuction cup bars or lifting frames with cross-bars\nApplying this type of lifting device to large tiles improves rigidity and permits completely safe transport on tile trolleys (120x280cm).\nReinforced trolley \nWe recommend the use of reinforced trolleys to move tiles around large sites and to move tiles in which holes, cutouts or cuts have \nbeen made to permit the passage of electrical cables or water pipes.\nWork bench with aluminium profiles \nUse a work bench with aluminium profiles to support the tiles you need to work on practically and safely. Install the work bench on a \nstable and even surface. Suitable for 60x120, 120x120, 120x260, 120x280cm.\nMOVING TILES BY HAND ON SITE\nTo ensure operator safety, always move large tiles one at a time. At least two people are needed to move each tile, and more may be \nneeded depending on the weight of the tile.\nManual tile lifting kits include single suction cups for 120x120cm tiles or suction cup frames for tiles of 120x280cm and above.\nSingle suction cups\nUse suction cups with individual handles only to lay a small number of tiles in ground level areas that are easily accessible and provide \nplenty of room for manoeuvre. Attach the suction cup to the centre of the tile to ensure good balance when moving it.\nSuction cup frames\nPlace the frame over the centre of the tile so that the ends of bars touch the walls of the crate. To stop the edges of the tile coming into \ncontact with the floor, adjust the end hooks to leave a small gap between the tile and the floor.\n4_WORKING ON LARGE TILES\n \nAccurate cuts, shapes, cutouts and holes can be made by specialist tile workshops and processing centres using cutting discs, CNC \nsystems, water jets and other professional equipment. Simple jobs can be completed on site, but special attention is needed during both \n",46,{"image":198,"text":199,"number":200},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.47.png","92\n93\nmovement and working. \nA bench of suitable size, with aluminium support profiles is ideal for cutting and drilling jobs.\nCNC MACHINING (OFF-SITE)\nCNC machines can perform high-precision operations on large tiles, including the forming of sink surrounds.\nWATER JET MACHINING (OFF-SITE)\nWater jet machines can be used for various operations including cutting, shaping and hole formation, with accurately formed corners \nand edges and correct final chamfering.\nEDGE FINISHING (OFF-SITE)\nAutomatic machines and special tools are required to finish edges. All kinds of edge should be finished using a cutter and an edge \nchamfering tool. \nThe minimum width of straight edges is 2 mm. \nThe minimum radius of rounded edges is 2 mm.\nHOLES\nHoles for accessories, taps, fittings and electrical cables must be at least 5 cm away from the edge of the tile. The minimum corner radius \nof internal cutouts must be 5 mm. Outside edges should always be chamfered for maximum strength.\nInstructions:\n1. Position the large tile on a stable, clean and flat work bench. Keep the finished surface facing up.\n2. Start the work using a diamond disc mounted on an angle grinder or drill (normal mode, not hammer). Cut the tile at an angle of about \n75°.\n3. Gently oscillate the tool to complete the hole. Keep the cutting disc wet to avoid overheating. Use a diamond countersink to make \nholes that will remain visible.\n4. On completion of work, clean the area thoroughly.\nSTRAIGHT CUTS \nUse a cutting guide to align the cutting tool. Only use diamond cutting discs that are designed for porcelain tile and suitable for use on \nthe machine in question. Discs must be water cooled and speed reduced at the beginning and end of the cut. Adjust rotation and feed \nspeed to suit the dimensions of the disc and the nature of the cut. To obtain ‘L’ shapes, make straight cuts first and then drill a hole at \nthe corner.\nMANUAL STRAIGHT CUTS\nPosition the large tile you need to cut on a stable work bench of suitable size. \nUse a cutting guide to align a tungsten carbide cutting tool over the line to be cut. \nInstructions:\n1. Lower the bar and cutting wheel on to the line to be cut.\n2. Cut the ends of the tile for about 5 cm, working from the inside towards the outside. \n3. Complete the cut without stopping and at constant speed and pressure.\n4. Move the tile so that the line of the cut protrudes about 10-15 cm from the bench.\n5. Break off one of the two ends with a pincers. Again using a pincers, apply gentle pressure to the other end to detach the entire \nsection along the cutting line. Two people are needed for this job to avoid the cut section falling and breaking. \n6. Remove the cutting guide and smooth the remaining sharp edge of the tile with a diamond pad or resin grinder.\nMANUAL CURVED CUTS\nPosition the large tile you need to cut on a stable work bench of suitable size. \nUse a cutting guide to align a tungsten carbide cutting tool over the line to be cut.\nInstructions:\n1. Mark out the cutting line with a pencil.\n2. Use an angle grinder with a suitable cutting disc to cut the tile along the marked line.\nRECTANGULAR CUTOUTS\n‘L’ or ‘C’ shaped cutouts may be required:\n• on the edge of a tile, near corners or columns\n• in the centre of a tile, to fit accessories, taps, electrical equipment, sinks, hobs, etc. Cutouts must be positioned at least 5 cm from the \nedge of the tile and from other holes. \nInstructions:\n1. Position the large tile on a stable, clean and flat work bench. Keep the finished surface facing up.\n2. Mark the outline of the cutout.\n3. Use a drill in normal (not hammer) mode with a diamond bit or an angle grinder with a cutting disc of 6-8 mm in diameter. Proceed to \nmake circular holes at the inside corners of the marked cutout. The cutting tool must be cooled continuously.\n4. Complete the cutout using an angle grinder with a small diameter (max. 125 mm) diamond disc to cut along the straight edges.\n5_PREPARING THE SURFACE AND APPLYING ADHESIVE\nBefore applying adhesive, make sure that the back of the tile is perfectly clean and free from ceramic powder and engobe.\nMake all necessary 45° corner tile cuts before applying adhesive.\nTo clean the tiles, use a sponge damped in a water and detergent solution.\nThe adhesive must cover the entire surface and be of uniform thickness.\nTo achieve this condition use the technique of double application. \nApply adhesive in straight lines parallel with the short side of the tile.\nThis permits air to escape more easily. Start by applying adhesive to the back of the tile using a square toothed spatula with teeth no \nsmaller than 3 mm. Proceed parallel with the short side of the tile, taking care to cover the entire back of the tile, including the corners. \nNow apply adhesive to the substrate using a slant ridge spatula with teeth of at least 10 mm, proceeding in the same direction as for the \nback of the tile and taking care not to leave any area uncovered. Facing tiles should be applied with the aid of an additional mechanical \nsupport. \nUse a class C2-S1\u002FS2 adhesive on floors. For walls, use a class T adhesive with reduced vertical slip. Always choose the type of adhesive \nbest suited to the substrate.\n6_INSTALLATION\n \nBefore you start installing tiles, make sure that the lot is of sufficient quantity and of the right colour and thickness. Follow all the rules \nSLABS TECHNICAL INFO\nand precautions necessary for correct installation. Prepare the substrate, ensure the correct composition of mortars or adhesives, \nrespect specified drying times, expansion joint positions and beating methods, etc.\nInstalling tiles with adhesives\nTiles must be installed by qualified persons using suitable equipment. Installation should always be performed under good lighting \nconditions.\nThe choice of adhesive depends on the type of tile (material and size), the substrate to be covered and the use to which the tile will be \nsubject.\nCheck that the material has been correctly installed before the adhesive dries completely, so that minor corrections can be made if \nnecessary.\nInstalling tiles with fresh mortar \nThe use of fresh, cement-based mortar or “thick-bed” mortar is not recommended for tile sizes with long sides of over 30 cm or for non-\nabsorbent substrates.\nInstructions:\n1. Check that the substrate (screed) is hard enough, clean, free from cracks and smooth, with a maximum variation in level of 1 mm\u002F2 \nmetres.\n2. First apply adhesive to the tile and substrate, then lift the tile and, with great care and using suitable moving equipment, lay it gently \non the adhesive of the substrate. Once in place, the tile cannot be lifted again, and position adjustments are restricted to a maximum of \n4-5 cm.\n3. Use a manual or electric, anti-bounce tile beater to beat the tile, working from the centre outwards and in straight lines. This ensures \nmaximum adhesion between the tile\u002Fadhesive\u002Fsubstrate and facilitates the elimination of air. Remove any adhesive forced out from the \njoints to keep them free for grouting.\n4. Place spacers around the edges of contact with other tiles to form a joint of at least 2 mm.\n5. Position the tiles one after another, moving them into place with a suitable manual tool and leaving a joint of at least 2 mm between \nthem. Always lay floors first and then tile the walls. A gap of at least 3 mm should be left between the perimeter of the floor and the \nbottom of walls.\n6. Use self-levelling spacers to ensure the accurate positioning of tiles. These should be removed when the adhesive is dry and before \ngrouting. Insert wedges by pushing them towards the tile laid previously. Wedges can correct up to 1 mm of difference in height.\n7. When the adhesive is completely set, remove the levelling wedges with a mallet. \n8. After installation, and depending on the type of adhesive used, floor surfaces should not be walked on for 12-24 hours.\nTechnical joints\nStructural expansion and movement joints are essential to the durability of an attractive tiled surface. \nAsk a professional tiler for advice and\u002For help. \nStructural expansion joints should be located over those found in the substrate and made using a suitable sealant or profile.\nIn outdoor floors, movement joints must be provided in areas of 9-12 sq.m. depending on the substrate and in high traffic indoor areas or \non flexible substrates. Areas can be increased to 20-25 sq.m for indoor floors over a stable substrate.\nIn any case, always leave a gap of 3-5 mm between the perimeter of the floor and any walls, columns or corners and between tiled \nsections and sections covered in other materials.\nThe manufacturer declines all responsibility for installations without adequate joints between tiles: the minimum acceptable joint between tiles is \n2 mm.\n7_GROUTING\nWait for the adhesive to set completely before grouting.\nInstructions:\n1. Make sure that the joints are clear and free from all traces of adhesive and\u002For powder. Residual material preventing filling of the joint \nto at least 2\u002F3 the thickness of the tile must be removed.\n2. Grout small areas at a time (4-5 sq.m.) especially when working with textured, non-slip or polished tiles. Use a suitable rubber spatula. \nAlways test grout of a colour that contrasts with the tiles on a small, hidden area before grouting the rest of the surface.\n3. Remove excess grout from the surface in diagonal strokes before the product dries, and remove all residues. \n4. Clean the surface thoroughly with a sponge damped in clean water then wipe down the surface, including the joints with a damp \ncloth. Use a sponge and plenty of water to clean off epoxy grouts. \nThe reaction times and hardness of these products makes it impossible to remove residues once set. Always refer to the grout \nmanufacturer’s specifications to ensure that the product is suitable for the type of tile.\n8_CLEANING\nThe entire tiled surface must be cleaned, including the tiles, joints, movement joints and profiles. Cleaning must continue until all traces \nof installation materials have been eliminated. \nINITIAL CLEANING\nInitial cleaning is of fundamental importance for all subsequent steps and for correct maintenance over time. Thorough initial cleaning \nhelps floors remain attractive and protected for years to come, and only has to be performed once, before the floor is used. \nInitial cleaning should be performed 4-5 days after completion of grouting, when the grout sealant is perfectly dry, but no later than \n10 days after. Use an acid or alkaline detergent to suit the characteristics of the sealant. Always test detergents on an unused tile or on \na small hidden area of the floor to ensure compatibility, especially in the case of lapped or polished tiles. Do not use cleaning products \ncontaining hydrofluoric acid (HF) or its derivatives.\nAfter grouting and cleaning, the surface may still present a film of cement residue that cannot be removed using water alone. In such \ncases, the residue must be removed using an acid-based product, diluted according to the manufacturer’s instructions. \nInstructions:\n1. Start by wetting the tile surface, especially the joints, which are not normally acid resistant.\n2. Next, distribute the prepared acid solution over the surface and leave it react for a short time (2 minutes). \n3. Do not allow the solution to dry on the floor. Remove it either manually or using a single-head scrubber-dryer fitted with a non-\nabrasive disc.\n4. Rinse the surface thoroughly afterwards.\nUse of a floor cleaner is particularly recommended for textured tiles and large surfaces. Manual methods can then be used to clean \npoints inaccessible to the machine such as corners, along walls and wherever the machine cannot operate.\nORDINARY CLEANING\nThe purpose of ordinary cleaning is to remove dirt and marks and to restore the surface’s original appearance.\nPorcelain tiles do not require protective treatment: regular, thorough cleaning is sufficient to keep it in perfect condition. \nEN\n",47,{"image":202,"text":203,"number":204},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.48.png","94\nClean tiled surfaces thoroughly using hot water, a soft cloth or sponge and neutral detergent if necessary. \nIndustrial scrubber-dryers can be used to clean large floors, with inaccessible areas cleaned manually afterwards.\n9_GENERAL RECOMMENDATIONS\nNever rub surfaces with abrasive materials such as metal scrubbing pads or hard brushes as these might leave indelible scratches or \nmarks.\nRemove greasy or oily residues using a detergent containing organic solvents or with an alkaline detergent (pH>9), then rinse the area \nthoroughly.\nDo not use soaps as they can leave a slippery film on the surface, especially if used with hard water.\nDo not use products containing waxes or shine- enhancing rinse agents. Do not use abrasive detergents on smooth and\u002For polished \nsurfaces. \nIn the case of matt materials, always test abrasive detergents on a small area of tile first. \nAlways test any non-neutral detergent on an unused tile or on a hidden area of the floor first. \nWARNING:\nFor material that has already been laid, Terratinta Group Srl SB:\n• does not accept any complaints for visible defects.\n• does not accept liability for the quality of the tiled surface but only for the characteristics of the material supplied.\n• once the material has been laid, it is wise to keep aside a few tiles for possible future repairs or to have a sample of the material in the \nevent of complaints.\n1_SISTEMI DI IMBALLAGGIO\n \nPer lo stoccaggio e il trasporto delle lastre in condizioni di sicurezza è stato studiato un imballo realizzato su misura. Le lastre, siano esse \ntutte dello stesso formato o di formati differenti, sono riposte all’interno della cassa. Gli imballi sono spediti in condizioni di massimo \ncarico o secondo le richieste dei singoli ordini.\nSI RACCOMANDA DI MOVIMENTARE LA CASSE UNA ALLA VOLTA.\nCassa per 120x280cm\nCm 291,6 x 144,6 h 34,4 • Kg lastra 48,3  • Lastre per cassa 20 • Mq per cassa 67,12 • Kg cassa piena 1056 • Sovrapponibilità max 10 casse a \nMagazzino\nCassa per 120x260cm\nCm 275 x 136 h 28, • Kg lastra 44  • Lastre per cassa 20 • Mq per cassa 62,40 • Kg cassa piena 880 • Sovrapponibilità max 10 casse a \nMagazzino\nCassa per 120x120cm\nCm 130 x 130 x h 58 • Kg lastra 20,30  • Lastre per cassa 50  • Mq per cassa 72 • Kg cassa piena 1015 • Sovrapponibilità max n° 4 casse a \nMagazzino\nCassa per 60x120cm\nCm 130 x 130 x h 58 • Kg lastra 10,15  • Lastre per cassa 96  • Mq per cassa 69,12 • Kg cassa piena 975 • Sovrapponibilità max n° 4 casse a \nMagazzino\n2_MOVIMENTAZIONE DEGLI IMBALLI\nLato lungo \nÈ l’opzione più indicata. Usare forche lunghe almeno 1,4 m allargate al massimo per coprire il più possibile la superficie dell’imballo. \nLato corto \nUsare forche lunghe almeno 2,1 m allargate al massimo per coprire il più possibile la superficie dell’imballo. \nCARICO CAMION E CONTAINER \nPer caricare gli imballi nei container si possono usare carrelli elevatori oppure è possibile caricare da terra, con l’aiuto di rampe su misura. \nPer assicurare il materiale durante il trasporto  si raccomanda l’uso di cinghie, tiranti e airbag. Durante il carico assicurarsi sempre che il \npeso sia distribuito per evitare sbilanciamenti durante la movimentazione. Il calcolo per il riempimento deve sempre tenere conto dei \nlimiti di peso per il trasporto. \nDISPOSIZIONE PER CARICO SU CONTAINER\nFORMATO 120x280cm\nCONTAINER 20’: 10 CASSE \nCONTAINER 40’: 20 CASSE, FARE ATTENZIONE AL PESO LORDO MASSIMO\nFORMATO 120x260cm\nCONTAINER 20’: 10 CASSE \nCONTAINER 40’: 20 CASSE, FARE ATTENZIONE AL PESO LORDO MASSIMO\nFORMATO 120x120cm\nCONTAINER 20’: 12 CASSE \nCONTAINER 40’: 27 CASSE, FARE ATTENZIONE AL PESO LORDO MASSIMO\nFORMATO 60x120cm\nCONTAINER 20’: 12 CASSE \nCONTAINER 40’: 27 CASSE, FARE ATTENZIONE AL PESO LORDO MASSIMO\n3_MOVIMENTAZIONE DELLE LASTRE IN CANTIERE\nGLI STRUMENTI DA CANTIERE\nPer la movimentazione delle lastre nel cantiere è importante usare gli strumenti adatti ai grandi formati. \nVentose \nSLABS TECHNICAL INFO\nITA\n95\nUsare ventose a pompa su superfici non lisce o strutturate per garantire un’ottima presa durante la movimentazione manuale (120x120). \nUsare ventose con gomma antimacchia sulle superfici chiare. \nBarre con ventose o telaio con traverse \nLo strumento, applicato alla lastra, ne aumenta la rigidità consentendo di spostarla con carrelli specifici, in completa sicurezza (120x280). \nCarrello rinforzato \nConsigliamo di usarlo per la movimentazione in cantiere su superfici ampie e per spostare lastre su cui sono stati eseguiti fori, scassi o \naltri interventi per il passaggio di impianti elettrici o idrici. \nBanco di lavoro con profilati in alluminio \nUsare un banco di lavoro con profilati in alluminio per eseguire le lavorazioni in comodità e sicurezza. Installare il tavolo su una superficie \nstabile e piana. Adatto a 60x120, 120x120, 120x260, 120x280cm.\nMOVIMENTAZIONE MANUALE IN CANTIERE\n \nPer la completa sicurezza degli operatori, movimentare le lastre una alla volta. \nPer la movimentazione delle lastre è necessario il contributo di almeno due operatori, variabile a seconda del peso complessivo della \nlastra. \nIl kit di sollevamento manuale delle lastre include ventose singole per lastre 120x120cm oppure un telaio con ventose per lastre \n120x280cm. \nVentose singole \nUsare maniglie con ventose solo in caso di posa di poche lastre e locali a piano terra, facilmente accessibili e con ampi spazi di manovra. \nAgganciare le ventose al centro della lastra per una movimentazione in perfetto equilibrio. \nTelaio con ventose \nSistemare il telaio al centro della lastra, in modo che le estremità inferiori delle barre aderiscano alla parete della cassa. Per evitare il \ncontatto tra il bordo lastra e il suolo, regolare i ganci delle estremità lasciando un minimo di spazio tra terreno e lastra.\n4_LAVORAZIONI SULLE LASTRE\n \nTagli, sagomature, scassi o fori sulle lastre si possono eseguire in laboratori e centri specializzati attraverso taglio a disco, CNC, water jet. \nLe lavorazioni più semplici si possono eseguire direttamente in cantiere, con massima attenzione durante la movimentazione e \nl’esecuzione. \nUn banco da lavoro con profilati in alluminio delle giuste dimensioni è l’ideale per tagli e forature puliti.\nMACCHINE CNC (C\u002FO Laboratori specializzati – NON IN CANTIERE).\nLe macchine a controllo numerico permettono di realizzare lavorazioni particolari con grande precisione, tra cui il filo-top per il lavello.\nMACCHINE A IDROGETTO (C\u002FO Laboratori specializzati – NON IN CANTIERE). \nIl taglio a idrogetto permette diversi tipi di taglio, sagomatura o foratura, con massima definizione di spigoli e bordi. \nBORDO (C\u002FO Laboratori specializzati – NON IN CANTIERE)\nPer la finitura dei bordi servono macchine automatiche e utensili specifici. Completare tutti i tipi di finitura con un rompifilo o un bisello \nperimetrale. Larghezza minima dei bordi diritti, 2 mm; angolo di curvatura minimo dei bordi arrotondati, R 2mm.\nFORI\nI fori utili per accessori, rubinetteria o impianti elettrici devono distare almeno 5 cm dai bordi esterni. \nIl raggio minimo degli angoli interni deve essere di 5 mm. Smussare sempre i bordi esterni con rompifilo per aumentarne la resistenza. \nIstruzioni:\n 1. Posizionare la lastra su un piano di lavoro stabile, pulito e planare. Rivolgere la superficie rifinita verso l’alto.\n 2. Cominciare la lavorazione con una fresa diamantata montata su una smerigliatrice angolare, oppure un trapano non battente. \nLa lastra deve essere incisa con un angolo di circa 75°. \n3. Eseguire il foro facendo oscillare lo strumento con cautela. Mantenere la fresa sempre bagnata  per evitarne il surriscaldamento. \nIn caso di ‘foro  a vista’, si raccomanda l’utilizzo di svasatori diamantati. \nTAGLIO A MACCHINA RETTILINEO\nPosizionare la macchina per il taglio lungo una guida di taglio. \nUsare sempre dischi diamantati per gres porcellanato adatti alla macchina impiegata, raffreddati ad acqua con velocità ridotta in entrata \ne uscita.\nRegolare le velocità di rotazione e avanzamento secondo le dimensioni del disco e della lavorazione prevista. \nPer le sagomature a L, prima di procedere con i tagli lineari praticare un foro in corrispondenza dell’angolo. \nTAGLIO MANUALE RETTILINEO \nPosizionare la lastra da tagliare su un banco di lavoro stabile e della giusta dimensione. Usare una guida di taglio con utensile incisore al \ncarburo di tungsteno, posizionato lungo la linea dell’area da tagliare. \nIstruzioni:\n1. Appoggiare la barra di taglio con la rotellina di incisione in corrispondenza della linea di taglio prevista. \n2. Incidere per circa 5 cm le estremità della lastra, dall’interno verso l’esterno. \n3. Eseguire l’incisione completa senza pause, con velocità di taglio e pressione costanti.\n4. Spostare la lastra sul banco, attenti a far sporgere la linea di incisione di circa 10-15 cm.\n5. Realizzare lo spacco su una delle due estremità con una pinza troncatrice. Proseguire applicando delicatamente pressione con la pinza \nsull’altra estremità, no al distacco della sezione lungo la linea di taglio. Per evitare la caduta o la rottura della porzione tagliata sono \nnecessarie due persone. \n6. Rimossa la guida di incisione, eliminare il filo tagliente della lastra con un tampone diamantato o una mola in resina. \nTAGLIO MANUALE NON RETTILINEO \nSi consiglia questo tipo di taglio in opera solo per piccole lavorazioni. Per le lavorazioni più complesse, rivolgersi a laboratori specializzati. \nIstruzioni:\n1. Tratteggiare la linea di taglio con una matita. \n2. Usare una smerigliatrice angolare con dischi idonei per tagliare la lastra secondo la linea disegnata. \nSCASSI RETTANGOLARI\n Gli scassi possono essere a ‘L’ o a ‘C’: \n• sul bordo della lastra, in prossimità di  angoli o colonne  \n• al centro della lastra, per sistemare accessori, rubinetteria, impianti elettrici, lavelli, piani cottura.\nSe realizzati lontani dal bordo devono essere fatti a una distanza minima di 5 cm dai bordi o da altre aperture.  \n",48,{"image":206,"text":207,"number":208},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.49.png","96\nIstruzioni:\n1. Posizionare la lastra su un piano di lavoro stabile, pulito e planare. La sua superficie rifinita va rivolta verso l’alto. \n2. Tratteggiare i bordi dello scasso da eseguire. \n3. Usare un trapano non battente, o una smerigliatrice, con punta diamantata o fresa con diametro 6-8 mm. Seguire la stessa procedura \ndella foratura circolare lavorando in prossimità  degli angoli interni dello scasso disegnato. Mantenere lo strumento costantemente \nraffreddato. \n4. Completare lo scasso tagliando con una smerigliatrice angolare con disco diamantato di piccolo diametro (max 125mm) lungo i bordi \ntratteggiati.\n5_PREPARAZIONE SUPPORTO E STESURA COLLANTE\nPrima di stendere l’adesivo, assicurarsi che il retro della lastra sia perfettamente pulito, senza polvere ceramica o engobbio. \nPer lastre che necessitano la jollatura a 45° procedere alla lavorazione prima della stesura del collante. Per la pulizia, utilizzare una \nspugna con soluzione di acqua e detergente. La stesura del collante deve essere a letto pieno, condizione che si ottiene col metodo \ndella doppia spalmatura. \nI movimenti dovranno essere lineari, così da realizzare una stesura rettilinea, sempre parallela al lato corto della lastra, per facilitare la \nfuoriuscita dell’aria. Iniziare a stendere la colla sul retro della lastra con una spatola dentata con dente dritto - mai inferiore a 3 mm - e \nprocedere sempre parallelamente al lato corto della lastra, avendo cura di distribuire l’adesivo su tutta la superficie, angoli compresi. \nStendere quindi la colla sul sottofondo con una spatola a denti inclinati con dente minimo di 10 mm, procedendo nello stesso verso \nadottato per il retro della lastra, senza lasciare aree prive di collante. Per le lastre posate in facciata, predisporre un aggancio meccanico \nsupplementare.\nPer i pavimenti si consiglia l’utilizzo di un adesivo di classe C2-S1\u002FS2. Per i rivestimenti, invece, si raccomanda una colla di classe T, con \nscivolamento verticale limitato. In tutti i casi, valutare il tipo di adesivo in funzione del supporto.\n6_POSA\n \nPrima di iniziare la posa, accertarsi che la partita di materiale sia adeguata e sufficiente per quantità, tono e calibro. Rispettare tutte le \nnorme e le precauzioni alla base di una corretta esecuzione del lavoro: preparazione del sottofondo, composizione della malta o dei \ncollanti, rispetto dei tempi di essicazione, posizionamento dei giunti di dilatazione, battitura, ecc. \nPosa con adesivi \nLa posa deve essere effettuata da personale qualificato e con attrezzi adeguati. Si consiglia di eseguire l’operazione sempre in condizioni \nottimali di illuminazione. \nLa scelta dell’adesivo dipende dalla tipologia delle piastrelle (gruppo di appartenenza e formato), dalla superficie da rivestire e dalla sua \ndestinazione d’uso. Verificare la posa del materiale prima che il collante sia secco, per facilitare eventuali correzioni. \nPosa con malta fresca \nLa posa a malta cementizia fresca o “strato spesso” è sconsigliata per formati con lato maggiore di  30 cm e con supporti non assorbenti. \nIstruzioni:\n1. Verificare che il fondo (massetto) sia sufficientemente stagionato, pulito, privo di fessurazioni e liscio, con una differenza di planarità \nmassima \ndi 1 mm\u002F2 m.\n2. Dopo la doppia spalmatura, sollevare la lastra e posarla con estrema cura sul collante del supporto, attraverso gli strumenti per la \nmovimentazione: una volta posata, la lastra non sarà più sollevabile e si potrà muoverla fino a un massimo di 4-5 cm.\n3. Usare un frattazzo anti-rimbalzo, manuale o elettrico, per battere la lastra dal centro verso l’esterno con movimenti lineari, garantendo \nla massima aderenza lastra\u002Fadesivo\u002Fsupporto e assicurando l’uscita di tutta l’aria rimasta tra le due superfici. Se dopo la battitura \nfuoriesce adesivo dalle fughe, asportarlo e svuotarle. \n4. Posizionare lungo i bordi a contatto con le altre lastre i distanziatori, che garantiscono una fuga pari almeno a 2 mm. \n5. Posizionare le lastre una dopo l’altra e avvicinarle con l’apposito strumento manuale, lasciando almeno 2 mm di fuga. Cominciare \nsempre dalla posa del pavimento e continuare con il rivestimento a parete. Tra pavimento e parete consigliamo di creare un giunto \nperimetrale di almeno 3 mm.  \n6. Il posizionamento della lastra deve essere calibrato sfruttando i distanziatori autolivellanti, da rimuovere a collante secco e prima della \nstuccatura. Inserire i cunei spingendoli sempre verso la lastra posata in precedenza: assicurano una correzione fino a 1 mm di dislivello.\n7. Quando la colla è completamente asciutta, rimuovere i cunei con una mazzetta. \n8. Terminata la posa, in base al collante impiegato, la superficie non dovrà essere calpestata prima di 12-24 ore. \nGiunti tecnici\nInserire giunti di dilatazione strutturali e di frazionamento è fondamentale per il mantenimento di una buona superficie piastrellata: si \nconsiglia quindi di utilizzare la collaborazione e\u002Fo consulenza di un posatore professionista. \nPer i giunti di dilatazione strutturale, rispettare quelli già presenti nel sottofondo e realizzarli utilizzando sigillante idoneo o profili ad hoc. \nIl giunto di frazionamento deve essere posato all’interno di un’area di 9-12 mq, in base al sottofondo, per la posa di pavimenti in esterno, \nin aree interne soggette ad alto calpestio o su sottofondi soggetti a flessioni; per la posa in ambienti interni con sottofondo stabile, le \nspecchiature possono essere di circa 20-25 mq. \nIn ogni condizione, completare la posa del suolo lasciando un giunto perimetrale di 3-5 mm dalle pareti, colonne o spigolature e tra \npiastrelle e altri materiali. Si declina ogni responsabilità per la posa senza fuga tra le piastrelle: si considera posa a giunto minimo quella \ncon fuga di 2 mm.\n7_STUCCATURA\nPrima di realizzare le fughe, attendere fino alla completa asciugatura del collante. \nIstruzioni:\n1. Assicurarsi che i giunti di posa siano vuoti e liberi da ogni traccia di collante e\u002Fo polveri. Eventuali residui che non garantiscono il \nriempimento di almeno i 2\u002F3 dello spessore della piastrella dovranno essere rimossi meccanicamente. \n2. Stuccare piccole superfici per volta (4-5 mq) in particolare se si tratta di prodotti strutturati, antiscivolo e levigati, utilizzando apposite \nspatole in gomma. Per fughe in netto contrasto cromatico con le piastrelle posate, si consiglia di testare sempre il fugante su un’area \nlimitata e nascosta. \n3. Eliminare l’eccesso di fugante dalla superficie con movimenti diagonali, quando il prodotto è ancora umido, e togliere tutti i residui. \n4. Pulire accuratamente con una spugna bagnata in acqua pulita e ripassare con uno straccio umido su tutta la superficie, comprese le \nfughe.\nPer gli stucchi epossidici si raccomanda la pulizia con spugna e abbondante acqua. \nLa velocità di reazione e indurimento di questi prodotti rende impossibile la rimozione dei residui dopo l’indurimento. In ogni caso, \nconsultare sempre le specifiche dei produttori di materiale fugante per verificare la correttezza della scelta in base al tipo di piastrella.\nSLABS TECHNICAL INFO\n8_PULIZIA\nLa pulizia deve riguardare l’intera superficie della piastrellatura: piastrelle, fughe, giunti di deformazione e profili. L’operazione è corretta \nquando si raggiunge la completa eliminazione di tutti i residui dei materiali di posa. \nPULIZIA INIZIALE\nIl lavaggio dopo la posa è una fase di fondamentale importanza per tutti gli interventi successivi e per la corretta manutenzione nel \ntempo. \nUn accurato lavaggio iniziale permette ai pavimenti di restare belli e protetti a lungo e si esegue normalmente una sola volta prima \ndell’utilizzo del pavimento. \nSi raccomanda di effettuare la pulizia iniziale dopo 4-5 giorni dal completamento della stuccatura  della superficie, quando la sigillatura \ndelle fughe risulta completamente asciutta, e non più tardi di 10. \nUsare un detergente adeguato, a base acida o alcalina in funzione delle caratteristiche del sigillante. Si consiglia di testare sempre \nla resistenza del prodotto ai detergenti su un pezzo non posato o su una piccola porzione nascosta della superficie piastrellata, in \nparticolare per prodotti lappati o levigati.\nEvitare l’uso di prodotti di pulizia contenenti acido fluoridrico (HF) e suoi derivati. \nLa superficie fugata e pulita può presentare un film di residui cementizi non asportabili con sola acqua. In questi casi è necessario \nl’utilizzo di un prodotto a base acida, opportunamente diluito secondo quanto dichiarato dal produttore. \nIstruzioni: \n1. Per prima cosa, bagnare la superficie piastrellata, in particolare le fughe, di norma non resistenti agli acidi. \n2. Spargere poi la soluzione acida preparata e far agire per un breve tempo (2 minuti).\n3. Non lasciare asciugare il prodotto applicato,  ma rimuovere la soluzione con una macchina monospazzola con disco non abrasivo e \naspira liquidi e\u002Fo manualmente.\n4. Al termine, risciacquare abbondantemente.  La pulizia eseguita con macchine è particolarmente consigliata per prodotti strutturati e \nper grandi superfici e va sempre completata manualmente  nei punti difficilmente raggiungibili, soprattutto negli angoli, lungo le pareti e \nin ogni zona in cui la monospazzola non può operare. \nPULIZIA ORDINARIA\nLa pulizia ordinaria delle superfici ha lo scopo di rimuovere lo sporco, cancellare i segni e ripristinare l’aspetto originale. \nLe piastrelle in gres porcellanato non hanno bisogno di trattamenti di protezione: una corretta e regolare pulizia è sufficiente a \nmantenere inalterata la superficie. Pulire in modo accurato lavando con acqua calda, straccio o spugna morbida ed eventualmente con \ndetergenti neutri. \nPer locali con grandi superfici, è possibile utilizzare macchine industriali lavasciuga, con completamento manuale dove necessario.\n9_RACCOMANDAZIONI GENERALI\nNon strofinare le superfici con strumenti abrasivi, come pagliette in metallo o spazzole dure che potrebbero lasciare graffi e segni \nindelebili.  \nRimuovere eventuali residui grassi o oleosi con detergenti contenenti solventi organici o con detergenti alcalini (pH>9), poi risciacquare \naccuratamente. Non utilizzare saponi, perché potrebbero lasciare uno strato viscido, in particolare se utilizzati con acque dure.  \nNon utilizzare prodotti contenenti cere o brillantanti. Evitare l’uso di detergenti abrasivi su superfici lucide e\u002Fo levigate. \nSu materiali matt, utilizzare solo dopo verifica su una piccola porzione piastrellata. In generale, l’uso di qualunque detergente non neutro \ndeve essere prima testato su una piastrella non posata o su una porzione nascosta della pavimentazione.  \nAVVERTENZE: \nTerratinta Group Srl SB a materiale già posato: \n• non accetta contestazioni dovute a vizi palesi\n• non risponde sulla qualità dell’opera piastrellata ma solamente sulle caratteristiche del materiale fornito. \nAl termine della posa, è bene conservare alcune piastrelle di scorta per eventuali riparazioni o anche per disporre di un campione \nrappresentativo del materiale in caso di contestazione.\nITA\n",49,{"image":210,"text":211,"number":212},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.50.png","99\nprinted in Italy\nMarch 2022\n“Stay hungry, stay foolish.” \nS. Jobs  1955-2011\nDOWNLOAD\nA R E A\n",50,{"image":214,"text":215,"number":216},"\u002Fmedia\u002Fimages\u002F1d\u002F99da6f5ad99cbacbeec76416016628-28dfc659fb.51.png","100\nterratintagroup.com   |   Tel. +39 0536911408\nvia Viazza II Tronco 45 Fiorano Modenese \n(MO) Italy     \nTerratinta Group Srl SB   \n",51,[],0,false,true,{"success":220,"data":222,"meta":439,"count":440,"next":441,"previous":442,"results":477,"brand_chips":538},[223,236,248,261,271,284,297,307,317,326,336,348,358,368,377,387,400,410,420,430],{"id":224,"title":225,"slug":226,"image":227,"source":228,"brand_name":229,"brand":230,"brand_slug":231,"file_size":232,"pages":233,"pages_count":234,"matched_pages":235,"match_count":218,"two_pages":219,"show_text":220},26599,"News 2026","porada-news-2026","\u002Fmedia\u002Fimages\u002Fce\u002Fd99f531b06a46fd5bee10f83389e8c-296fcd1b7e.1.png","\u002Fprivate\u002Ffiles\u002Fc2\u002F62a24ea3de0c50ca2a88817e98c8e9-296fcd1b61.pdf","Porada",394,"porada","9.3 MB",[],100,[],{"id":237,"title":238,"slug":239,"image":240,"source":241,"brand_name":242,"brand":243,"brand_slug":244,"file_size":245,"pages":246,"pages_count":200,"matched_pages":247,"match_count":218,"two_pages":219,"show_text":220},26598,"Second Life Contract 2026","slide-second-life-contract-2026","\u002Fmedia\u002Fimages\u002Ff3\u002F13dd76d3e357545fc9c73d1730cc16-296dd67b83.1.png","\u002Fprivate\u002Ffiles\u002F60\u002F2ed17461507e1c6defb90fc3af7f6b-296dd67b81.pdf","Slide",401,"slide","8.0 MB",[],[],{"id":249,"title":250,"slug":251,"image":252,"source":253,"brand_name":254,"brand":255,"brand_slug":256,"file_size":257,"pages":258,"pages_count":259,"matched_pages":260,"match_count":218,"two_pages":219,"show_text":220},26597,"General 2025","edition-bougainville-general-2025","\u002Fmedia\u002Fimages\u002F20\u002F9482f96b2ff16c3751dc0bf38106ee-296be38596.1.png","\u002Fprivate\u002Ffiles\u002Fc0\u002Fa8bc3710f63d3f9c918648acc349bf-296be38521.pdf","Edition Bougainville",2197,"edition-bougainville","1337.1 MB",[],326,[],{"id":262,"title":263,"slug":264,"image":265,"source":266,"brand_name":254,"brand":255,"brand_slug":256,"file_size":267,"pages":268,"pages_count":269,"matched_pages":270,"match_count":218,"two_pages":219,"show_text":220},26596,"General new 2026","edition-bougainville-general-new-2026","\u002Fmedia\u002Fimages\u002F70\u002Fd61873e1175db61f2e03ca6c34fbef-296be3853e.1.png","\u002Fprivate\u002Ffiles\u002Fe3\u002F31e29b6f8f4e9d6bf34b5e02b7af8b-296be38521.pdf","14.6 MB",[],109,[],{"id":272,"title":273,"slug":274,"image":275,"source":276,"brand_name":277,"brand":278,"brand_slug":279,"file_size":280,"pages":281,"pages_count":282,"matched_pages":283,"match_count":218,"two_pages":219,"show_text":220},26595,"Outdoor Decor 2026","ethimo-outdoor-decor-2026","\u002Fmedia\u002Fimages\u002F06\u002Fe01cc9faac107000b2d52f32269655-296bd1e75f.1.png","\u002Fprivate\u002Ffiles\u002F55\u002Fb1013d3410d0dab58c0b01c63c83d2-296bd1e759.pdf","Ethimo",1796,"ethimo","56.9 MB",[],324,[],{"id":285,"title":286,"slug":287,"image":288,"source":289,"brand_name":290,"brand":291,"brand_slug":292,"file_size":293,"pages":294,"pages_count":295,"matched_pages":296,"match_count":218,"two_pages":219,"show_text":220},26576,"Francesco Balzano 2026","giobagnara-francesco-balzano-2026","\u002Fmedia\u002Fimages\u002Fa3\u002F4b32a3ff2d18cecd6a14375150eeea-292d0fd09a.1.png","\u002Fprivate\u002Ffiles\u002F57\u002Fcfa9eaed024c0b9900e8fe56aad231-292d0f5b38.pdf","GioBagnara",2329,"giobagnara","40.4 MB",[],63,[],{"id":298,"title":299,"slug":300,"image":301,"source":302,"brand_name":290,"brand":291,"brand_slug":292,"file_size":303,"pages":304,"pages_count":305,"matched_pages":306,"match_count":218,"two_pages":219,"show_text":220},26577,"Rabitti1969 2026","giobagnara-rabitti1969-2026","\u002Fmedia\u002Fimages\u002Fc5\u002F704db07c2e74d60a1833dd93dc3967-292d146463.1.png","\u002Fprivate\u002Ffiles\u002Fcc\u002F74a628f430699a1576927d6a5c43f0-292d121a8c.pdf","106.6 MB",[],182,[],{"id":308,"title":309,"slug":310,"image":311,"source":312,"brand_name":290,"brand":291,"brand_slug":292,"file_size":313,"pages":314,"pages_count":315,"matched_pages":316,"match_count":218,"two_pages":219,"show_text":220},26578,"Stephane Parmentier 2026","giobagnara-stephane-parmentier-2026","\u002Fmedia\u002Fimages\u002Faa\u002F75a74fb0948097cf84e6c5693fc962-292d13ef2c.1.png","\u002Fprivate\u002Ffiles\u002Fb1\u002Fcc1cbee33e9c8c6513a907bd065ac5-292d121a97.pdf","191.0 MB",[],207,[],{"id":318,"title":319,"slug":320,"image":321,"source":322,"brand_name":290,"brand":291,"brand_slug":292,"file_size":323,"pages":324,"pages_count":184,"matched_pages":325,"match_count":218,"two_pages":219,"show_text":220},26579,"Kelly Wearstler 2026","giobagnara-kelly-wearstler-2026","\u002Fmedia\u002Fimages\u002F64\u002Fa1d46bc2d33136e7f1f59853d5b272-292d137a16.1.png","\u002Fprivate\u002Ffiles\u002F50\u002Ffbc23bd4891257c38e3a49f93fd0c6-292d121aaa.pdf","27.8 MB",[],[],{"id":327,"title":328,"slug":329,"image":330,"source":331,"brand_name":290,"brand":291,"brand_slug":292,"file_size":332,"pages":333,"pages_count":334,"matched_pages":335,"match_count":218,"two_pages":219,"show_text":220},26580,"Glenn Sestig 2026","giobagnara-glenn-sestig-2026","\u002Fmedia\u002Fimages\u002Fd3\u002F130de4d10ed29d4fd25cb84db70291-292d1304b6.1.png","\u002Fprivate\u002Ffiles\u002Fb9\u002Fc5c7c0b5ffb8e2ea735f61cd5fbdf6-292d121aae.pdf","91.8 MB",[],146,[],{"id":337,"title":338,"slug":339,"image":340,"source":341,"brand_name":342,"brand":343,"brand_slug":344,"file_size":345,"pages":346,"pages_count":80,"matched_pages":347,"match_count":218,"two_pages":219,"show_text":220},26581,"Inspiring Excellence 2025","roberto-giovannini-inspiring-excellence-2025","\u002Fmedia\u002Fimages\u002F71\u002F318a1f5e60ccc5acfdcc1ae5be5060-292d128f9c.1.png","\u002Fprivate\u002Ffiles\u002F87\u002F5e0b076f595f5160ca7a5f7458849b-292d121abb.pdf","Roberto Giovannini",1388,"roberto-giovannini","8.1 MB",[],[],{"id":349,"title":350,"slug":351,"image":352,"source":353,"brand_name":290,"brand":291,"brand_slug":292,"file_size":354,"pages":355,"pages_count":356,"matched_pages":357,"match_count":218,"two_pages":219,"show_text":220},26582,"Elie Saab 2026","giobagnara-elie-saab-2026","\u002Fmedia\u002Fimages\u002F6b\u002F81da6c9cdf7b4edff952a62ef7b9ca-292d16ae2e.1.png","\u002Fprivate\u002Ffiles\u002F79\u002Fcb5cd133e6f07379794938ed005de3-292d14d9af.pdf","58.4 MB",[],101,[],{"id":359,"title":360,"slug":361,"image":362,"source":363,"brand_name":290,"brand":291,"brand_slug":292,"file_size":364,"pages":365,"pages_count":366,"matched_pages":367,"match_count":218,"two_pages":219,"show_text":220},26583,"Pigment France 2026","giobagnara-pigment-france-2026","\u002Fmedia\u002Fimages\u002F00\u002F394bcaf5adfa23d7243aa512a0dd67-292d16393c.1.png","\u002Fprivate\u002Ffiles\u002Fc4\u002F485c540ca42207213690262e6468a2-292d14d9b5.pdf","127.5 MB",[],151,[],{"id":369,"title":370,"slug":371,"image":372,"source":373,"brand_name":290,"brand":291,"brand_slug":292,"file_size":374,"pages":375,"pages_count":315,"matched_pages":376,"match_count":218,"two_pages":219,"show_text":220},26584,"Rudi 2026","giobagnara-rudi-2026","\u002Fmedia\u002Fimages\u002F7e\u002F4dd524b56e79aeda431f14f4fe1069-292d15c3f9.1.png","\u002Fprivate\u002Ffiles\u002F14\u002Fc19ea3b6cbea78f50140a3e5f872d8-292d14d9c0.pdf","134.0 MB",[],[],{"id":378,"title":379,"slug":380,"image":381,"source":382,"brand_name":290,"brand":291,"brand_slug":292,"file_size":383,"pages":384,"pages_count":385,"matched_pages":386,"match_count":218,"two_pages":219,"show_text":220},26585,"Riviere 2026","giobagnara-riviere-2026","\u002Fmedia\u002Fimages\u002Fed\u002F017702644dc149d47ca54e182c820b-292d154e96.1.png","\u002Fprivate\u002Ffiles\u002F8c\u002F4afc407dc4db9e13219e5295f76976-292d14d9cb.pdf","127.3 MB",[],202,[],{"id":388,"title":389,"slug":390,"image":391,"source":392,"brand_name":393,"brand":394,"brand_slug":395,"file_size":396,"pages":397,"pages_count":398,"matched_pages":399,"match_count":218,"two_pages":219,"show_text":220},26586,"Outdoor 2026","atmosphera-outdoor-2026","\u002Fmedia\u002Fimages\u002Fd6\u002Fab855609f1a95186f6ccd83055cc20-292d18f82f.1.png","\u002Fprivate\u002Ffiles\u002F90\u002Fb7983122cc2d6cabbb384898663939-292d179899.pdf","Atmosphera",977,"atmosphera","39.2 MB",[],235,[],{"id":401,"title":402,"slug":403,"image":404,"source":405,"brand_name":290,"brand":291,"brand_slug":292,"file_size":406,"pages":407,"pages_count":408,"matched_pages":409,"match_count":218,"two_pages":219,"show_text":220},26587,"Giobagnara x PoltronaFrau 2026","giobagnara-x-poltronafrau-2026","\u002Fmedia\u002Fimages\u002Fd0\u002F6899938ad0400f5dbea066e0d861fc-292d1882ea.1.png","\u002Fprivate\u002Ffiles\u002F4c\u002Faac20af747b8da46542a7f50bb0c42-292d17989d.pdf","46.7 MB",[],58,[],{"id":411,"title":412,"slug":413,"image":414,"source":415,"brand_name":290,"brand":291,"brand_slug":292,"file_size":416,"pages":417,"pages_count":418,"matched_pages":419,"match_count":218,"two_pages":219,"show_text":220},26588,"Design Editions 2026","giobagnara-design-editions-2026","\u002Fmedia\u002Fimages\u002F94\u002F9e001b70b82b057a99547b62a5cd72-292d180db9.1.png","\u002Fprivate\u002Ffiles\u002F85\u002F8b7fba451e37f0288f2fd06246bf47-292d1798a2.pdf","331.6 MB",[],446,[],{"id":421,"title":422,"slug":423,"image":424,"source":425,"brand_name":290,"brand":291,"brand_slug":292,"file_size":426,"pages":427,"pages_count":428,"matched_pages":429,"match_count":218,"two_pages":219,"show_text":220},26589,"Encyclopedia 2026","giobagnara-encyclopedia-2026","\u002Fmedia\u002Fimages\u002Ff5\u002F8ff500491988ed2c8c49351db1fff5-292d1bb78a.1.png","\u002Fprivate\u002Ffiles\u002F6f\u002F7bb3601e56ae4fefdd94a2f11b57e2-292d1a57a1.pdf","358.6 MB",[],1981,[],{"id":431,"title":225,"slug":432,"image":433,"source":434,"brand_name":290,"brand":291,"brand_slug":292,"file_size":435,"pages":436,"pages_count":437,"matched_pages":438,"match_count":218,"two_pages":219,"show_text":220},26590,"giobagnara-news-2026","\u002Fmedia\u002Fimages\u002Fc9\u002F77e2d4731c2643875d7adc77b62a46-292d1b4203.1.png","\u002Fprivate\u002Ffiles\u002Fa6\u002F3fbc6e2e56d402392537b12f6edab9-292d1a57c5.pdf","85.8 MB",[],125,[],{"count":440,"next":441,"previous":442,"brand_chips":443},14117,"\u002Fapi\u002Fv1\u002Fcatalogs\u002F?page=2",null,[444,448,452,453,456,460,464,467,470,474],{"title":445,"slug":446,"count":447},"SICIS","sicis",92,{"title":449,"slug":450,"count":451},"La Fabbrica AVA","la-fabbrica-ava",77,{"title":9,"slug":11,"count":451},{"title":454,"slug":455,"count":451},"Magis","magis",{"title":457,"slug":458,"count":459},"True Design","true-design",64,{"title":461,"slug":462,"count":463},"Covet House","covet-house",61,{"title":465,"slug":466,"count":408},"Ares Line","ares-line",{"title":468,"slug":469,"count":408},"Poltrona Frau","poltrona-frau",{"title":471,"slug":472,"count":473},"Karpenter","karpenter",56,{"title":475,"slug":476,"count":473},"Visionnaire","visionnaire",[478,481,484,487,490,493,496,499,502,505,508,511,514,517,520,523,526,529,532,535],{"id":224,"title":225,"slug":226,"image":227,"source":228,"brand_name":229,"brand":230,"brand_slug":231,"file_size":232,"pages":479,"pages_count":234,"matched_pages":480,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":237,"title":238,"slug":239,"image":240,"source":241,"brand_name":242,"brand":243,"brand_slug":244,"file_size":245,"pages":482,"pages_count":200,"matched_pages":483,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":249,"title":250,"slug":251,"image":252,"source":253,"brand_name":254,"brand":255,"brand_slug":256,"file_size":257,"pages":485,"pages_count":259,"matched_pages":486,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":262,"title":263,"slug":264,"image":265,"source":266,"brand_name":254,"brand":255,"brand_slug":256,"file_size":267,"pages":488,"pages_count":269,"matched_pages":489,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":272,"title":273,"slug":274,"image":275,"source":276,"brand_name":277,"brand":278,"brand_slug":279,"file_size":280,"pages":491,"pages_count":282,"matched_pages":492,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":285,"title":286,"slug":287,"image":288,"source":289,"brand_name":290,"brand":291,"brand_slug":292,"file_size":293,"pages":494,"pages_count":295,"matched_pages":495,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":298,"title":299,"slug":300,"image":301,"source":302,"brand_name":290,"brand":291,"brand_slug":292,"file_size":303,"pages":497,"pages_count":305,"matched_pages":498,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":308,"title":309,"slug":310,"image":311,"source":312,"brand_name":290,"brand":291,"brand_slug":292,"file_size":313,"pages":500,"pages_count":315,"matched_pages":501,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":318,"title":319,"slug":320,"image":321,"source":322,"brand_name":290,"brand":291,"brand_slug":292,"file_size":323,"pages":503,"pages_count":184,"matched_pages":504,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":327,"title":328,"slug":329,"image":330,"source":331,"brand_name":290,"brand":291,"brand_slug":292,"file_size":332,"pages":506,"pages_count":334,"matched_pages":507,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":337,"title":338,"slug":339,"image":340,"source":341,"brand_name":342,"brand":343,"brand_slug":344,"file_size":345,"pages":509,"pages_count":80,"matched_pages":510,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":349,"title":350,"slug":351,"image":352,"source":353,"brand_name":290,"brand":291,"brand_slug":292,"file_size":354,"pages":512,"pages_count":356,"matched_pages":513,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":359,"title":360,"slug":361,"image":362,"source":363,"brand_name":290,"brand":291,"brand_slug":292,"file_size":364,"pages":515,"pages_count":366,"matched_pages":516,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":369,"title":370,"slug":371,"image":372,"source":373,"brand_name":290,"brand":291,"brand_slug":292,"file_size":374,"pages":518,"pages_count":315,"matched_pages":519,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":378,"title":379,"slug":380,"image":381,"source":382,"brand_name":290,"brand":291,"brand_slug":292,"file_size":383,"pages":521,"pages_count":385,"matched_pages":522,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":388,"title":389,"slug":390,"image":391,"source":392,"brand_name":393,"brand":394,"brand_slug":395,"file_size":396,"pages":524,"pages_count":398,"matched_pages":525,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":401,"title":402,"slug":403,"image":404,"source":405,"brand_name":290,"brand":291,"brand_slug":292,"file_size":406,"pages":527,"pages_count":408,"matched_pages":528,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":411,"title":412,"slug":413,"image":414,"source":415,"brand_name":290,"brand":291,"brand_slug":292,"file_size":416,"pages":530,"pages_count":418,"matched_pages":531,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":421,"title":422,"slug":423,"image":424,"source":425,"brand_name":290,"brand":291,"brand_slug":292,"file_size":426,"pages":533,"pages_count":428,"matched_pages":534,"match_count":218,"two_pages":219,"show_text":220},[],[],{"id":431,"title":225,"slug":432,"image":433,"source":434,"brand_name":290,"brand":291,"brand_slug":292,"file_size":435,"pages":536,"pages_count":437,"matched_pages":537,"match_count":218,"two_pages":219,"show_text":220},[],[],[539,540,541,542,543,544,545,546,547,548],{"title":445,"slug":446,"count":447},{"title":449,"slug":450,"count":451},{"title":9,"slug":11,"count":451},{"title":454,"slug":455,"count":451},{"title":457,"slug":458,"count":459},{"title":461,"slug":462,"count":463},{"title":465,"slug":466,"count":408},{"title":468,"slug":469,"count":408},{"title":471,"slug":472,"count":473},{"title":475,"slug":476,"count":473}]