Staino & Staino: Easy-S Doors, 17 27

5
15
20
10
25
15
12
10
1/2
1/8
1/8
12
21
1/3
12
10
1/4
1/8
1/8
12
1/3
1/2
10
Air with optional profiles
Profile mm 12x12. Up to mm 3000.
WALL PROFILE FOR AIR REDUCTION:
A 12 x 12 mm section profile can be installed on the wall to reduce the air between the door and the wall.
WALL UPRIGHT :
Optional wall stop upright, includes 10x10mm check profile ad-
ded to the door
Air without profiles
CENTRAL CLOSING UPRIGHT :
Central closing upright for double-door, consisting of a 10x10mm
check profile on each door
Profile mm 12x12
Both the upright against the wall and the striker profile are
made of aluminum coordinated with the door.
The central meeting upright allows to eliminate the light between
the doors even in the case of out of plumb.
OPTIONAL FLOOR
WHEEL:
The floor wheel has the
purpose of increasing the sta-
bility of the door, it must only
be used in the presence of
smooth floors without joints,
such as parquet or resin.
ACCESSORIES FOR SLIDING DOORS:
The drag kit includes the optional floor wheel.
Overflow upright for sliding doors
SPECIAL VERSION WITH HORIZONTAL AND VERTICAL CROSSPIECES:
The crosspieces dedicated to the Easy-S collection have a cross section of 12 x 12 mm horizontally and 10 x 8 mm vertically, they are positioned on
both sides of the glass. The finish of the crosspieces is coordinated with the perimeter profiles of the door. Crossbars are not available for. mirror
doors. The prices shown refer only to the crosspieces, positioned as shown in the drawings (Three, Four, Six, Seven).
For any custom compositions ask for feasibility and prices to: commerciale@stainoestaino.it.
THREE VERSION
12 mm horizontal crossbars evenly spaced apart.
FOUR VERSION
12 mm horizontal crosspieces and 10 mm central vertical crosspiece.
The crossbars are positioned according to the size of the door with the
following proportions.
SIX VERSION
12 mm horizontal crosspieces and 10 mm central vertical cross-
piece. The crossbars are spaced evenly from each other.
SEVEN VERSION
12 mm horizontal crosspieces and 10 mm vertical crosspieces. The crossbars
are positioned according to the size of the door with the following proportions.
33