510
NUT
80
120
160
69%
Road optical components according to Rule CEI EN 13201
Lane width 5 m – Lamp power 70W
Distance between poles 27 m – Lamp mounting height 6.4 m
I/H ratio = 4.2
Photometric requirements
Lm [cd/m2]
UO
UI
TI [%]
Real values
0.6
0.38
0.4
5
Nominal values according to class ME5
≥0.5
≥0.35
≥0.4
≥15
Bike lane optical components according to Rule CEI EN 13201
Lane width 3 m – Lamp power 70W
Distance between poles 21 m – Lamp mounting height 4.3 m
I/H ratio = 4.9
Photometric requirements
Em [lx]
Emin [lx]
Real values
22
3
Nominal values according to class S4
≥5
≥1
Optical components and light sources
Different types of optical components are available for
Nut: spot, superspot, medium, flood, road, symmetrical and
asymmetrical. The light sources used by the projector are
metal halide discharge lamps (70W, 150W and 250W - G12;
45W - 60W - 90W - 140W - PGZ12; 70W - 150W - Rx7s;
250W - Fc2; 70W - E27.
Accessories
The luminaire is equipped with a range of accessories
for wall and pole mounting, as well as with wall-washer
louvers and anti-glare shields, directional louvers,
anti-vandalism protection grid.
DISCHARGE LAMPS
MT (CDM-T) - G12
70W
MT (CDM-T) - G12
150W
MT (CDM-T) - G12
250W
MD (CDM-TD) - RX7s
70W
MD (CDM-TD) - RX7s
150W
MD - Fc2
250W
PGZ12
45W
PGZ12
60W
PGZ12
90W
PGZ12
140W
ST - E27
70W
Technical specifications
The Nut outdoor projector is extremely flexible in its
applications.
It is provided by Quattrobi in two different sizes
(height: 415 and 615 mm), for specific installations and uses.
It is equipped with a range of accessories for wall,
ground and pole mounting, with solutions that allow to
install multiple overlaying lighting elements.
The projector is entirely made of die-cast aluminium
and is fitted with a front louver in high-resistance
tempered glass.
The reflector is made of super-pure oxidized and
polished aluminium, with spot, superspot, medium,
flood, road, symmetrical and asymmetrical optical
components. Gaskets are of silicone material and screws
of stainless steel.
II insulation class guarantees maximum safety.
The hot-galvanised and coated steel poles, to be
mounted on the ground or with fixing plate, are
available in three different heights
(4000 - 6000 - 9000 mm) and are provided with cable
inlet slot, earthing connection, electrical equipment slot.
The projector uses metal halide discharge lamps and is
supplied with a PF-corrected electromechanical ballast.
With UV stabilised epoxy-polyester coat finish, Nut is
available in grey and anthracite standard colours.
Thanks to the materials used and to the special
structural solutions, the luminaires of the Nut line are
weatherproof and can be installed even in severe
environmental settings.
