URBAN | 69
H
L
H
L
Crossings and intersections
Even if the width of the roadway is higher
supports of the same height of the road
are typically used for crossroads and
intersections. Statistically, this is the places
where street accidents happen most often
and therefore, the current regulations, in
these types of plant, provide additional
requirements. These plants have a
medium-high L/H ratio, and the SR/125
is the best solution. The type of emission
with functional frontal asymmetry ensures
the vertical illuminance values required to
increase driver safety.
Large areas
In the lighting of large areas, the
positioning of the poles is very restricted.
Luminaires in car parks, for example, can
only be installed at the intersections of
the lines delimiting the parking spaces
or, in some cases, exclusively along the
perimeter. SR/150, with high frontal
emission, is the most suitable solution
for this type of application. It guarantees
the levels of uniformity required by the
regulations in force using a reduced
number of poles.
SR/125
L/H = 1.25 (1.125 ≤ L/H ≤ 1.375)
SR/150
L/H = 1.50 (1.375 ≤ L/H ≤ 1.625)
