The ENEC certified lighting fixtures are approved by a third-party certification
body and comply with the European electrical safety standards. Companies
that offer ENEC products apply a quality system in compliance with UNI EN
ISO 9001.
The RCM Mark "Regulatory Compliance Mark", certifies that each individual
electrical and electronic product complies with the mandatory safety
requirements in Australia and New Zealand such as the electrical safety and
electromagnetic compatibility.
The EAC mark certifies the conformity of the products with the regulations of
the Eurasian customs' area; the mark allows the access to the marketplace of
Russia, Belarus, Armenia, Kazakhstan, Kyrgyzstan.
The VDE mark documents the safety and conformity to standards of an
electrical product with regard to electrical, mechanical, thermal, toxic and
other hazards. It is awarded exclusively by the VDE test and certification
institute (VDE-PZI). A manufacturer may only provide its products with the
VDE mark after checking and issuing of a corresponding certificate.
All testing activities are supervised once a year by the Official Certification
Bodies (IMQ S.p.A. and UL).
The laboratories are recognized by IMQ and VDE according to the CTFs
STAGE 2 (Customers’ Testing Facilities) procedures that release the
ENEC label in compliance with the following standards:
IEC/EN 60598-1
Luminaires
IEC/EN 60598-2-1
Luminaires - Part 2-1: Particular requirements – Specification for fixed general
purpose luminaires
IEC/EN 60598-2-2
Luminaires - Part 2-2: Particular requirements – Recessed luminaires
IEC/EN 60598-2-3
Luminaires - Part 2-3: Particular requirements –Luminaires for road and street
lighting
IEC/EN 60598-2-4
Luminaires - Part 2-4: Particular requirements – Portable general purpose
luminaires
IEC/EN 60598-2-5
Luminaires - Part 2-5: Floodlights
IEC/EN 60598-2-7
Luminaires - Part 2-7: Particular requirements – Portable luminaires for garden
use
IEC/EN 60598-2-13
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC/EN 6598-2-18
Luminaires - Part 2-18: Particular requirements – Luminaries for swimming
pools and similar applications
IEC/EN 62031
LED modules for general lighting - Safety specifications
Furthermore, the laboratories are recognized by UL according to the WTDP
(Witness Test Data Program) for the release of the UL label in com-
pliance with the following standards:
UL 1598
Luminaires
CSA C22.2 NO 250.0-08
Luminaires
UL 8750
Standard for Light Emitting Diode (LED) Equipment for Use in Lighting
Products
CSA C22.2 NO 250.13-12
Light Emitting Diode (LED) Equipment for Lighting Applications
Within the laboratories, there is also an outfitted room (with the best EMI Re-
ceivers) for electromagnetic compatibility measurements and to ensure that
the products are in compliance with the most important industry standards
such as:
CISPR 15
Limits and methods of measurement of radio disturbance characteristics of
electrical lighting and similar equipment
EN 55015
European Limits and methods of measurement of radio disturbance cha-
racteristics of electrical lighting and similar equipment
Testing laboratory
XXXI
