255
ANHANG
LED LUMINAIRES
In the case of luminaires with integrated LED technology, the light
sources can only be replaced by the manufacturer.
CONVENTIONAL LAMPS
Information regarding lamps complies with the ZVEI [Central Association
of the Electrical and Electronics Industry] lamp designation system (LBS).
RETROFIT LAMPS
Compatibility specifcations of retroft lamps refer to the technical pro-
perties of the installed socket and/or the installed transformer and must
be checked individually by the customer.
LIGHT VALUES
For luminaires with integrated LEDs, all lumen information comprises ac-
tual measures values at operating temperature for the luminaire. Nomi-
nal information from the LED manufacturer is up to 20% higher.
LIGHT DISTRIBUTION CURVES
We will be happy to provide you with light distribution curves in common
fle formats. Please contact the lighting design department.
SURFACES, COLOURS AND MATERIALS
All information regarding surfaces are merely colour information and do
not specify material designation. The metal surfaces of our products are
refned using different manufacturing processes, depending on the mate-
rial and the desired effect. We use methods such as polishing, lacquering,
anodising or galvanising. Shades are generally satin fnished on the out-
side and refection coated on the inside. Some shades are hand-blown
and hand crafted single unit products with individual character. Small
differences are unavoidable.
PROTECTION CLASS
Unless otherwise, luminaires are always technically designed according
to protection class IP 20. All transformers and power supply units have
safety extra-low voltage (SELV). Lighting systems are only approved for
indoor applications. Damp rooms or wet rooms are excluded from this.
SCOPE OF DELIVERY
Unless otherwise specifed, luminaires are always supplied without
lamps. Accessories should always be ordered separately.
SOURCES
Products from OLIGO should only be acquired from our specialist retail
and wholesale trade partners. A retailer overview can be found at www.
oligo.de.
OFFERS
All offers are non-binding and only take effect with our written confrma-
tion on the basis of our T&C. Verbal agreements require written confr-
mation. For special models of our products, please contact our customer
service department.
SPECIAL DESIGNS
For special designs of our articles, please contact our customer service.
VALIDITY
All previous brochures become invalid with the publication of this cata-
logue. In case of doubt, the order date applies for the aforementioned
effectiveness.
LEGAL NOTE
National and international property rights such as patents, registered
designs, industrial designs or trademarks are registered for many OLIGO
lighting systems and luminaires. All information in this catalogue – par-
ticularly the illustrations – may only be reproduced with prior written
authorisation.
DISCLAIMER
Subject to technical modifcations. No liability shall be accepted to the
accuracy of technical information or for colour differences.
TYPICAL UNITS OF MEASUREMENT AND ABBREVIATIONS
cd
=
Candela
lm
=
Lumen
K
=
Kelvin
CRI
=
Colour rendering index
V
=
Volt
VA
=
Volt-ampere
AC
=
Alternating current
DC
=
Direct current
Hz
=
Hertz
W
=
Watt
RAL
=
Standardised colour value
EEC
=
Energy efficiency class
PROTECTION CLASSES ACCORDING TO DIN 40 100 (EC Publ. 417)
Protection class 1
Exposed metal parts connected to the protective earth of the luminaire.
Protection class 2
Live parts are additionally insulated and cannot be touched in the event
of a fault.
Protection class 3
Safety extra-low voltage (SELV).