344
DA 2668
The cooker hood is fastened in the cut-out using clamps.
A solid installation surface, e.g. one made of wood, is
required. Make sure that the structure can support the
load. Around the clamps, components such as supports
and ducting must be at least 25 mm from the cut-out 1)
Alternative exhaust duct to the rear.
DA 2698
The cooker hood is fastened in the cut-out using clamps.
A solid installation surface, e.g. one made of wood, is
required. Make sure that the structure can support the
load. Around the clamps, components such as supports
and ducting must be at least 25 mm from the cut-out 1)
Alternative exhaust duct to the rear.
DA 2628
The cooker hood is fastened in the cut-out using clamps.
A solid installation surface, e.g. one made of wood, is
required. Make sure that the structure can support the
load. Around the clamps, components such as supports
and ducting must be at least 25 mm from the cut-out 1)
Alternative exhaust duct to the rear
DA 2450
1) Alternative exhaust duct to the rear and left
See the operating instructions for more in-depth
dimensions!
DA 2558 EXTA
1) Exhaust duct for flat ducting system 222 x 89 mm,
alternative to the rear and left.
See the operating instructions for more in-depth
dimensions!
DA 2578
1) Alternative exhaust duct to the rear and left
See the operating instructions for more in-depth
dimensions!
Cooker hood installation drawings
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 344
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 344
16.03.23 14:01
16.03.23 14:01
